Skip to contentCanada · Official-source record

# Electrician licence requirements in British Columbia

In British Columbia, certification for electricians is compulsory, through SkilledTradesBC.

[View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/252_2022)

### What the source says

> For the purposes of section 27 (1) [designation and scope of work of skilled trades certification trades] of the Act, each of the following trades is designated as a skilled trades certification trade, effective December 1, 2023: (a) construction electrician; (b) industrial electrician; (c) powerline technician; (d) sheet metal worker; (e) gasfitter — Class A; (f) gasfitter — Class B; (g) steamfitter/pipefitter; (h) refrigeration and air conditioning mechanic.

[View source](https://skilledtradesbc.ca/electrician-construction)

### What the source says

> Electrician, Construction | SkilledTradesBC

## Who regulates it

Regulator

[SkilledTradesBC](https://skilledtradesbc.ca/)[View source](https://skilledtradesbc.ca/electrician-construction)

### What the source says

> Electrician, Construction | SkilledTradesBC

Regulator website

[https://skilledtradesbc.ca/](https://skilledtradesbc.ca/)[View source](https://skilledtradesbc.ca/electrician-construction)

### What the source says

> SkilledTradesBC

Statute or rule

Skilled Trades BC Regulation, B.C. Reg. 252/2022 [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/252_2022)

### What the source says

> B.C. Reg. 252/2022

## Credential status

Certification status

Compulsory [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/252_2022)

### What the source says

> For the purposes of section 27 (1) [designation and scope of work of skilled trades certification trades] of the Act, each of the following trades is designated as a skilled trades certification trade, effective December 1, 2023: (a) construction electrician; (b) industrial electrician; (c) powerline technician; (d) sheet metal worker; (e) gasfitter — Class A; (f) gasfitter — Class B; (g) steamfitter/pipefitter; (h) refrigeration and air conditioning mechanic.

Red Seal available

Yes [View source](https://red-seal.ca/eng/trades/trades-list.shtml)

### What the source says

> Construction Electrician

Licensing level

Province [View source](https://skilledtradesbc.ca/electrician-construction)

### What the source says

> Construction Electrician is a Skilled Trades Certification trade, also known as a compulsory trade, in British Columbia.

## Credential levels

### Construction Electrician Apprentice Registration [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.

Scope

Work in the Construction Electrician trade as a registered apprentice [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004)

### What the source says

> A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;

Credential type

Apprentice registration [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.

Certification required

Yes [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004)

### What the source says

> A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;

Alternate route

Level 4 apprentices in this program are exempt from the 2:1 supervision ratio. [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> The ratio of apprentice to journeyperson is 2:1. This applies to apprentices in Levels 1, 2 and 3. Apprentices in Level 4 are exempt from the ratio.

Not stated in the official sources we checked: Experience, Classroom training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Construction Electrician Certificate of Qualification [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement

Scope

Construction Electrician work as a SkilledTradesBC-certified journeyperson [View source](https://red-seal.ca/eng/trades/const-elect.shtml)

### What the source says

> Construction electricians plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems.

Credential type

Trade certificate [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement

Certification required

Yes [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004)

### What the source says

> (1) A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28; (b) a person who is registered as an apprentice under a law similar to this Act in another Canadian jurisdiction; (c) a journeyperson;

Experience

6,000 hours [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Work-Based Training: 6,000 hours total

Exam required

Yes [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Interprovincial Red Seal Exam  Minimum 70%

Exam provider

SkilledTradesBC [View source](https://skilledtradesbc.ca/challenge-certification-exam)

### What the source says

> When you are ready to book your exam, sign into the Portal and navigate to the Exam Booking section.

Exam questions

100 [View source](https://red-seal.ca/eng/trades/constelectric/exam-information.shtml)

### What the source says

> This trade's Red Seal exam has 100 questions

Passing mark (%)

70 [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Interprovincial Red Seal Exam  Minimum 70%

Alternate route 1

Trade Qualifier challenge application: 9,000 documented hours of directly related experience working in the occupation. [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> 9,000 documented hours of directly related experience working in the occupation

Alternate route 2

Trade Qualifier pathway with Temporary Authorization while preparing for the certification exam. [View source](https://skilledtradesbc.ca/skilledtradescertification)

### What the source says

> Apply for Temporary Authorization to continue working in your trade as a Trade Qualifier preparing to write your certification exam.

Alternate route 3

Challenge-the-certification-exam route: application fee of $120 paid through the Portal. [View source](https://skilledtradesbc.ca/challenge-certification-exam)

### What the source says

> Pay the $120 application fee through the Portal and submit your application and declaration form(s).

Not stated in the official sources we checked: Classroom training, Exam time (minutes), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Interprovincial Red Seal endorsement, Construction Electrician [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement

Scope

Interprovincial Red Seal endorsement for Construction Electrician [View source](https://red-seal.ca/eng/trades/const-elect.shtml)

### What the source says

> Designated Red Seal in: AB, BC, MB, NB, NL, NS, NT, NU, ON, PE, QC, SK, YT

Credential type

Red Seal endorsement [View source](https://skilledtradesbc.ca/media/2216/download)

### What the source says

> Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement

Exam required

Yes [View source](https://www.red-seal.ca/eng/welcome.shtml)

### What the source says

> To get the Red Seal endorsement, you need to pass the Red Seal exam.

Exam provider

Provincial and territorial apprenticeship and certification authorities [View source](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

### What the source says

> Red Seal Exams are administered by provincial and territorial apprenticeship and certification authorities.

Exam questions

100 [View source](https://red-seal.ca/eng/trades/constelectric/exam-information.shtml)

### What the source says

> This trade's Red Seal exam has 100 questions

Exam time (minutes)

240 [View source](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

### What the source says

> Find out the number of questions on your trade's exam on the Red Seal website in the trade's Red Seal Exam Breakdowns page and divide that number into 240 minutes.

Passing mark (%)

70 [View source](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

### What the source says

> The Red Seal Exam has a pass mark of 70%.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Industrial Electrician Apprentice Registration [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.

Scope

Work in the Industrial Electrician trade as a registered apprentice [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004)

### What the source says

> A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;

Credential type

Apprentice registration [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.

Certification required

Yes [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004)

### What the source says

> A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;

Alternate route

Level 4 apprentices in this program are exempt from the 2:1 supervision ratio. [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> The ratio of apprentice to journeyperson is 2:1. This applies to apprentices in Levels 1, 2 and 3. Apprentices in Level 4 are exempt from the ratio.

Not stated in the official sources we checked: Experience, Classroom training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Industrial Electrician Certificate of Qualification [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement

Scope

Industrial Electrician work as a SkilledTradesBC-certified journeyperson [View source](https://red-seal.ca/eng/trades/indust-elect.shtml)

### What the source says

> Industrial electricians install, maintain, test, troubleshoot, service and repair industrial electrical equipment and associated electrical protection and controls.

Credential type

Trade certificate [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement

Certification required

Yes [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004)

### What the source says

> (1) A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28; (b) a person who is registered as an apprentice under a law similar to this Act in another Canadian jurisdiction; (c) a journeyperson;

Experience

6,000 hours [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Work-Based Training: 6,000 hours total

Exam required

Yes [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Interprovincial Red Seal Exam  Minimum 70%

Exam provider

SkilledTradesBC [View source](https://skilledtradesbc.ca/challenge-certification-exam)

### What the source says

> When you are ready to book your exam, sign into the Portal and navigate to the Exam Booking section.

Exam questions

100 [View source](https://red-seal.ca/eng/trades/industrialelectric/exam-information.shtml)

### What the source says

> This trade's Red Seal exam has 100 questions

Passing mark (%)

70 [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Interprovincial Red Seal Exam  Minimum 70%

Alternate route 1

Trade Qualifier challenge application: 9,000 documented hours of directly related experience working in the occupation. [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> 9,000 documented hours of directly related experience working in the occupation

Alternate route 2

Trade Qualifier pathway with Temporary Authorization while preparing for the certification exam. [View source](https://skilledtradesbc.ca/skilledtradescertification)

### What the source says

> Apply for Temporary Authorization to continue working in your trade as a Trade Qualifier preparing to write your certification exam.

Alternate route 3

Challenge-the-certification-exam route: application fee of $120 paid through the Portal. [View source](https://skilledtradesbc.ca/challenge-certification-exam)

### What the source says

> Pay the $120 application fee through the Portal and submit your application and declaration form(s).

Not stated in the official sources we checked: Classroom training, Exam time (minutes), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Interprovincial Red Seal endorsement, Industrial Electrician [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement

Scope

Interprovincial Red Seal endorsement for Industrial Electrician [View source](https://red-seal.ca/eng/trades/indust-elect.shtml)

### What the source says

> Designated Red Seal in: BC, MB, NB, NL, NS, NT, ON, PE, QC, YT

Credential type

Red Seal endorsement [View source](https://skilledtradesbc.ca/media/2217/download)

### What the source says

> Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement

Exam required

Yes [View source](https://www.red-seal.ca/eng/welcome.shtml)

### What the source says

> To get the Red Seal endorsement, you need to pass the Red Seal exam.

Exam provider

Provincial and territorial apprenticeship and certification authorities [View source](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

### What the source says

> Red Seal Exams are administered by provincial and territorial apprenticeship and certification authorities.

Exam questions

100 [View source](https://red-seal.ca/eng/trades/industrialelectric/exam-information.shtml)

### What the source says

> This trade's Red Seal exam has 100 questions

Exam time (minutes)

240 [View source](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

### What the source says

> Find out the number of questions on your trade's exam on the Red Seal website in the trade's Red Seal Exam Breakdowns page and divide that number into 240 minutes.

Passing mark (%)

70 [View source](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

### What the source says

> The Red Seal Exam has a pass mark of 70%.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Electrical Field Safety Representative (FSR), Class A [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> The Class A field safety representative (FSR) certificate of qualification

Scope

The Class A field safety representative (FSR) certificate of qualification allows you to submit declarations on behalf of your employer for any type of regulated electrical work [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> The Class A field safety representative (FSR) certificate of qualification allows you to submit declarations on behalf of your employer for any type of regulated electrical work. There are no voltage or ampere limitations.

Credential type

Other [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Class A, class B and class C certificates of qualification as a field safety representative are established.

Certification required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/installation-permits)

### What the source says

> An FSR must be named on every electrical permit application.

Experience

3,600 hours [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> A minimum of two years (3,600 hours) relevant electrical work experience under the Canadian Electrical Code, after receiving a Certificate of Qualification in the trade of Electrician.

Exam required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> The class A FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Exam provider

Technical Safety BC [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/exam-information)

### What the source says

> Electrical FSR Certification

Exam questions

60 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> The class A FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Passing mark (%)

70 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> The class A FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Open book

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> The class A FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Application fee

$340 CAD [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes

Exam fee

$193 CAD [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes

Renewal term (years)

3 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> FSR certificates must be renewed every 3 years.

Continuing education

8 hours [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.

Prerequisite licence

SkilledTradesBC certificate-holder route, s. 8: appropriate electrical certificate, required electrical-code course, examination and acceptable work experience. Sections 9 and 10 provide alternate applied-technologist and professional-engineer routes. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> In order to obtain a certificate of qualification for Class A, B or C as a field safety representative under section 7, an individual must (a) hold an appropriate SkilledTradesBC certificate, (b) complete a course in the application of electrical codes and standards required by the provincial safety manager, (c) pass an examination required by the provincial safety manager, and (d) have work experience acceptable to a provincial safety manager.

Alternate route 1

FSR certificate renewal: 2026 base fee $128 + GST; the schedule marks GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Field safety representative (FSR) certificate renewal4 & 5 $128 $134 per unit Yes

Alternate route 2

FSR evaluation before examination: 2026 base fee $340 + GST; non-refundable; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes

Alternate route 3

FSR in-person exam: 2026 base fee $193 + GST; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes

Alternate route 4

FSR remote exam alternative: 2026 base fee $183 + GST; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, Remote): New field safety representative (FSR)1, 2,& 3, Electrical safety officer (ESO)1 & 2 $183 $192 per unit Yes

Alternate route 5

Applied science technologist route, s. 9(1): electrical engineering technology qualifications, applied science technologist registration under the Professional Governance Act, required electrical-code course and examination. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> (a) holds qualifications in electrical engineering technology, (b) is registered as an applied science technologist under the Professional Governance Act , (c) completes a course in the application of electrical codes and standards required by a provincial safety manager, and (d) passes an examination required by the provincial safety manager.

Alternate route 6

Professional engineer route, s. 10(1): electrical engineering qualifications, membership in good standing with the Association of Professional Engineers and Geoscientists of British Columbia, and required examination. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> An individual who holds qualifications in electrical engineering and is a member in good standing with the Association of Professional Engineers and Geoscientists of British Columbia may apply to a provincial safety manager to obtain a certificate of qualification as a field safety representative in one of the classes of certificate of qualifications as a field safety representative referred to in section 7 if the individual passes an examination required by the provincial safety manager.

Alternate route 7

Applied technologist Class A or B: two years of acceptable work experience after a Class C FSR certificate, or three years of acceptable work experience with installations over 150 volts to ground. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> (a) 2 years of work experience, acceptable to a provincial safety manager, after receiving a class C certificate of qualification as a field safety representative, or (b) 3 years of work experience, acceptable to a provincial safety manager, with electrical installations in which the voltage of installation is more than 150 volts to ground.

Alternate route 8

Professional engineer Class A or B: two years of work experience acceptable to a provincial safety manager. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> A professional engineer who applies for a class A or class B certificate of qualification as a field safety representative must have two years of work experience acceptable to a provincial safety manager.

Alternate route 9

The electrical-code course for the trade-certificate route must have been completed within three years of the application date. [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)

### What the source says

> a recognized electrical course in the application of electrical codes and standards, from a recognized training provider or instructor, completed within three years of application date.

Alternate route 10

Class A/B/C renewal: complete at least 8 hours of continuing education or pass the required examination, subject to s. 10.1(5). [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.

Alternate route 11

If the holder fails the initial renewal examination attempt, renewal requires the applicable continuing-education hours (8 for Class A/B/C). [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Despite section 3 of the Safety Standards General Regulation, if a certificate holder fails on the initial attempt to pass an examination referred to in this section, the holder's certificate of qualification may not be renewed unless the certificate holder completes the applicable number of hours of continuing education required under this section.

Alternate route 12

The SkilledTradesBC certificate-holder route for Class A also requires three high voltage installations, s. 8(2). [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> In order to obtain a class A certificate of qualification as a field safety representative under this section, an individual must also complete three high voltage installations.

Not stated in the official sources we checked: Classroom training, Exam time (minutes), Licence fee, Minimum age, Insurance required, Bond required, Person of record required.

### Electrical Field Safety Representative (FSR), Class B [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)

### What the source says

> The Class B Field Safety Representative (FSR) certificate of qualification

Scope

Class B FSR declarations: completed electrical installations with voltage not exceeding 1000 volts, including 1000 volts. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> The holder of a class B certificate of qualification may make declarations only with respect to electrical installations in which the voltage of the completed installation does not exceed 1 000 volts.

Credential type

Other [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Class A, class B and class C certificates of qualification as a field safety representative are established.

Certification required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/installation-permits)

### What the source says

> An FSR must be named on every electrical permit application.

Experience

1,800 hours [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)

### What the source says

> A minimum one year (1,800 hours) relevant, acceptable electrical work experience under the Canadian Electrical Code, after receiving a Certificate of Qualification in the Trade of Electrician.

Exam required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)

### What the source says

> The class B FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Exam provider

Technical Safety BC [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/exam-information)

### What the source says

> Electrical FSR Certification

Exam questions

60 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)

### What the source says

> The class B FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Passing mark (%)

70 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)

### What the source says

> The class B FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Open book

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)

### What the source says

> The class B FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Application fee

$340 CAD [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes

Exam fee

$193 CAD [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes

Renewal term (years)

3 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)

### What the source says

> FSR certificates must be renewed every 3 years.

Continuing education

8 hours [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.

Prerequisite licence

SkilledTradesBC certificate-holder route, s. 8: appropriate electrical certificate, required electrical-code course, examination and acceptable work experience. Sections 9 and 10 provide alternate applied-technologist and professional-engineer routes. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> In order to obtain a certificate of qualification for Class A, B or C as a field safety representative under section 7, an individual must (a) hold an appropriate SkilledTradesBC certificate, (b) complete a course in the application of electrical codes and standards required by the provincial safety manager, (c) pass an examination required by the provincial safety manager, and (d) have work experience acceptable to a provincial safety manager.

Alternate route 1

FSR certificate renewal: 2026 base fee $128 + GST; the schedule marks GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Field safety representative (FSR) certificate renewal4 & 5 $128 $134 per unit Yes

Alternate route 2

FSR evaluation before examination: 2026 base fee $340 + GST; non-refundable; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes

Alternate route 3

FSR in-person exam: 2026 base fee $193 + GST; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes

Alternate route 4

FSR remote exam alternative: 2026 base fee $183 + GST; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, Remote): New field safety representative (FSR)1, 2,& 3, Electrical safety officer (ESO)1 & 2 $183 $192 per unit Yes

Alternate route 5

Applied science technologist route, s. 9(1): electrical engineering technology qualifications, applied science technologist registration under the Professional Governance Act, required electrical-code course and examination. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> (a) holds qualifications in electrical engineering technology, (b) is registered as an applied science technologist under the Professional Governance Act , (c) completes a course in the application of electrical codes and standards required by a provincial safety manager, and (d) passes an examination required by the provincial safety manager.

Alternate route 6

Professional engineer route, s. 10(1): electrical engineering qualifications, membership in good standing with the Association of Professional Engineers and Geoscientists of British Columbia, and required examination. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> An individual who holds qualifications in electrical engineering and is a member in good standing with the Association of Professional Engineers and Geoscientists of British Columbia may apply to a provincial safety manager to obtain a certificate of qualification as a field safety representative in one of the classes of certificate of qualifications as a field safety representative referred to in section 7 if the individual passes an examination required by the provincial safety manager.

Alternate route 7

Applied technologist Class A or B: two years of acceptable work experience after a Class C FSR certificate, or three years of acceptable work experience with installations over 150 volts to ground. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> (a) 2 years of work experience, acceptable to a provincial safety manager, after receiving a class C certificate of qualification as a field safety representative, or (b) 3 years of work experience, acceptable to a provincial safety manager, with electrical installations in which the voltage of installation is more than 150 volts to ground.

Alternate route 8

Professional engineer Class A or B: two years of work experience acceptable to a provincial safety manager. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> A professional engineer who applies for a class A or class B certificate of qualification as a field safety representative must have two years of work experience acceptable to a provincial safety manager.

Alternate route 9

The electrical-code course for the trade-certificate route must have been completed within three years of the application date. [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)

### What the source says

> a recognized electrical course in the application of electrical codes and standards, from a recognized training provider or instructor, completed within three years of application date.

Alternate route 10

Class A/B/C renewal: complete at least 8 hours of continuing education or pass the required examination, subject to s. 10.1(5). [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.

Alternate route 11

If the holder fails the initial renewal examination attempt, renewal requires the applicable continuing-education hours (8 for Class A/B/C). [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Despite section 3 of the Safety Standards General Regulation, if a certificate holder fails on the initial attempt to pass an examination referred to in this section, the holder's certificate of qualification may not be renewed unless the certificate holder completes the applicable number of hours of continuing education required under this section.

Not stated in the official sources we checked: Classroom training, Exam time (minutes), Licence fee, Minimum age, Insurance required, Bond required, Person of record required.

### Electrical Field Safety Representative (FSR), Class C [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)

### What the source says

> The Class C field safety representative (FSR) certificate of qualification

Scope

Class C FSR declarations: current not exceeding 200 amps and voltage not exceeding 150 volts to ground, single phase power; both boundary values are included. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> The holder of a class C certificate of qualification may make declarations only with respect to electrical installations in which the current and voltage in the installation do not exceed current of 200 amps and voltage of 150 volts to ground, single phase power.

Credential type

Other [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Class A, class B and class C certificates of qualification as a field safety representative are established.

Certification required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/installation-permits)

### What the source says

> An FSR must be named on every electrical permit application.

Experience

1,800 hours [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)

### What the source says

> You must have a minimum of one year (1,800 hours) of acceptable relevant electrical work experience under the Canadian Electrical Code, after receiving a Certificate of Qualification in the Trade of Electrician.

Exam required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)

### What the source says

> The class C exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Exam provider

Technical Safety BC [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/exam-information)

### What the source says

> Electrical FSR Certification

Exam questions

60 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)

### What the source says

> The class C exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Passing mark (%)

70 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)

### What the source says

> The class C exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Open book

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)

### What the source says

> The class C exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.

Application fee

$340 CAD [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes

Exam fee

$193 CAD [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes

Renewal term (years)

3 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)

### What the source says

> FSR certificates must be renewed every 3 years.

Continuing education

8 hours [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.

Prerequisite licence

SkilledTradesBC certificate-holder route, s. 8: appropriate electrical certificate, required electrical-code course, examination and acceptable work experience. Sections 9 and 10 provide alternate applied-technologist and professional-engineer routes. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> In order to obtain a certificate of qualification for Class A, B or C as a field safety representative under section 7, an individual must (a) hold an appropriate SkilledTradesBC certificate, (b) complete a course in the application of electrical codes and standards required by the provincial safety manager, (c) pass an examination required by the provincial safety manager, and (d) have work experience acceptable to a provincial safety manager.

Alternate route 1

FSR certificate renewal: 2026 base fee $128 + GST; the schedule marks GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Field safety representative (FSR) certificate renewal4 & 5 $128 $134 per unit Yes

Alternate route 2

FSR evaluation before examination: 2026 base fee $340 + GST; non-refundable; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes

Alternate route 3

FSR in-person exam: 2026 base fee $193 + GST; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes

Alternate route 4

FSR remote exam alternative: 2026 base fee $183 + GST; GST applicable (Yes). [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Certificate of Qualification exam (Digital, Remote): New field safety representative (FSR)1, 2,& 3, Electrical safety officer (ESO)1 & 2 $183 $192 per unit Yes

Alternate route 5

Applied science technologist route, s. 9(1): electrical engineering technology qualifications, applied science technologist registration under the Professional Governance Act, required electrical-code course and examination. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> (a) holds qualifications in electrical engineering technology, (b) is registered as an applied science technologist under the Professional Governance Act , (c) completes a course in the application of electrical codes and standards required by a provincial safety manager, and (d) passes an examination required by the provincial safety manager.

Alternate route 6

Professional engineer route, s. 10(1): electrical engineering qualifications, membership in good standing with the Association of Professional Engineers and Geoscientists of British Columbia, and required examination. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> An individual who holds qualifications in electrical engineering and is a member in good standing with the Association of Professional Engineers and Geoscientists of British Columbia may apply to a provincial safety manager to obtain a certificate of qualification as a field safety representative in one of the classes of certificate of qualifications as a field safety representative referred to in section 7 if the individual passes an examination required by the provincial safety manager.

Alternate route 7

Applied technologist Class C: one year of work experience acceptable to a provincial safety manager. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> An applied technologist who applies for a class C certificate of qualification as a field safety representative must have one year of work experience acceptable to a provincial safety manager.

Alternate route 8

The electrical-code course for the trade-certificate route must have been completed within three years of the application date. [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)

### What the source says

> a recognized electrical course in the application of electrical codes and standards, from a recognized training provider or instructor, completed within three years of application date.

Alternate route 9

Class A/B/C renewal: complete at least 8 hours of continuing education or pass the required examination, subject to s. 10.1(5). [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.

Alternate route 10

If the holder fails the initial renewal examination attempt, renewal requires the applicable continuing-education hours (8 for Class A/B/C). [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> Despite section 3 of the Safety Standards General Regulation, if a certificate holder fails on the initial attempt to pass an examination referred to in this section, the holder's certificate of qualification may not be renewed unless the certificate holder completes the applicable number of hours of continuing education required under this section.

Not stated in the official sources we checked: Classroom training, Exam time (minutes), Licence fee, Minimum age, Insurance required, Bond required, Person of record required.

### Technical Safety BC Electrical Contractor Licence [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)

### What the source says

> licensed electrical contractor

Scope

Electrical contractor businesses performing regulated electrical work in British Columbia [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)

### What the source says

> In order to perform regulated electrical work in BC, you must either be licensed by Technical Safety BC, employed by a Technical Safety BC licensed electrical contractor, or authorized to perform work yourself.

Credential type

Contractor licence [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)

### What the source says

> A licensed contractor is responsible for ensuring compliance with:

Certification required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)

### What the source says

> In order to perform regulated electrical work in BC, you must either be licensed by Technical Safety BC, employed by a Technical Safety BC licensed electrical contractor, or authorized to perform work yourself.

Licence fee

$267 CAD [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Electrical Contractor Licence - New $267 $280 per unit No

Renewal term (years)

1 [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)

### What the source says

> Licences must be renewed annually.

Prerequisite licence

Active FSR certificate of qualification designated on the electrical-contractor licence [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)

### What the source says

> The FSR must hold an active certificate to be designated. The scope of your licence will be limited to the class of the designated FSR’s certificate of qualification.

Bond required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)

### What the source says

> You will need to have a surety bond

Person of record required

Yes [View source](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)

### What the source says

> You will be asked to declare a designated Field Safety Representative (FSR) on your licence.

Alternate route

Electrical contractor licence renewal fee: $222 (2026 schedule rate, per unit) [View source](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)

### What the source says

> Electrical Contractor Licence - Renewal $222 $233 per unit No

Not stated in the official sources we checked: Experience, Classroom training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Continuing education, Minimum age, Insurance required.

## Apprenticeship and code requirements

Apprentice registration required

Yes [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004)

### What the source says

> A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;

Supervision ratio

2:1 apprentices to journeypersons for all skilled-trades certification trades. [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/252_2022)

### What the source says

> For the purposes of section 32 (2) [supervision ratios] of the Act, the supervision ratio of apprentices to journeypersons is 2:1 for all skilled trades certification trades.

Code book

B.C. Electrical Code (Canadian Electrical Code Part I) [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> The Canadian Electrical Code, Part I, Twenty-sixth Edition, Safety Standard for Electrical Installations, Canadian Standards Association Standard C22.1:24, amended as set out in the Schedule to this regulation and including any errata, is adopted by reference as the B.C. Electrical Code.

Code edition

Twenty-sixth Edition, CSA C22.1:24 [View source](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)

### What the source says

> The Canadian Electrical Code, Part I, Twenty-sixth Edition, Safety Standard for Electrical Installations, Canadian Standards Association Standard C22.1:24, amended as set out in the Schedule to this regulation and including any errata, is adopted by reference as the B.C. Electrical Code.

## Moving with it

Mobility

SkilledTradesBC recognizes Canadian trade-board Certificates of Qualification without recertification or reissue; certain trades have additional local safety-authority requirements. [View source](https://skilledtradesbc.ca/labour-mobility)

### What the source says

> If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate. For certain trades, you will need to contact the local safety authority as they have additional licenses and requirements to work within B.C.

## Prepare

[Practice exam for the Red Seal Construction Electrician examination](https://tradecredentialregistry.com/practice-exams/309a-electrician-construction-and-maintenance/)

## Sources

Last checked 2026-11-16

1. 1. [https://skilledtradesbc.ca/electrician-construction](https://skilledtradesbc.ca/electrician-construction)
2. 2. [https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/252_2022](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/252_2022)
3. 3. [https://red-seal.ca/eng/trades/trades-list.shtml](https://red-seal.ca/eng/trades/trades-list.shtml)
4. 4. [https://skilledtradesbc.ca/](https://skilledtradesbc.ca/)
5. 5. [https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004)
6. 6. [https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004](https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004)
7. 7. [https://skilledtradesbc.ca/media/2216/download](https://skilledtradesbc.ca/media/2216/download)
8. 8. [https://red-seal.ca/eng/trades/const-elect.shtml](https://red-seal.ca/eng/trades/const-elect.shtml)
9. 9. [https://skilledtradesbc.ca/challenge-certification-exam](https://skilledtradesbc.ca/challenge-certification-exam)
10. 10. [https://red-seal.ca/eng/trades/constelectric/exam-information.shtml](https://red-seal.ca/eng/trades/constelectric/exam-information.shtml)
11. 11. [https://skilledtradesbc.ca/skilledtradescertification](https://skilledtradesbc.ca/skilledtradescertification)
12. 12. [https://www.red-seal.ca/eng/welcome.shtml](https://www.red-seal.ca/eng/welcome.shtml)
13. 13. [https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)
14. 14. [https://skilledtradesbc.ca/media/2217/download](https://skilledtradesbc.ca/media/2217/download)
15. 15. [https://red-seal.ca/eng/trades/indust-elect.shtml](https://red-seal.ca/eng/trades/indust-elect.shtml)
16. 16. [https://red-seal.ca/eng/trades/industrialelectric/exam-information.shtml](https://red-seal.ca/eng/trades/industrialelectric/exam-information.shtml)
17. 17. [https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a)
18. 18. [https://www.technicalsafetybc.ca/technologies/electrical/installation-permits](https://www.technicalsafetybc.ca/technologies/electrical/installation-permits)
19. 19. [https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/exam-information](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/exam-information)
20. 20. [https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf](https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf)
21. 21. [https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b)
22. 22. [https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c](https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c)
23. 23. [https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences](https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences)
24. 24. [https://skilledtradesbc.ca/labour-mobility](https://skilledtradesbc.ca/labour-mobility)

---

Source: https://tradecredentialregistry.com/canada/british-columbia/electrician/
