Skip to contentCanada · Official-source record

# Plumber licence requirements in Ontario

In Ontario, certification for plumbers is compulsory, through Skilled Trades Ontario.

[View source](https://www.ontario.ca/laws/regulation/210876)

### What the source says

> 2. The following trades are classified as compulsory trades for the purposes of the Act: 1. Alignment and brakes technician. 2. Auto body and collision damage repairer. 3. Auto body repairer. 4. Automotive electronic accessory technician. 5. Automotive service technician. 6. Electrician — construction and maintenance. 7. Electrician — domestic and rural. 8. Fuel and electrical systems technician. 9. Hairstylist. 10. Hoisting engineer — mobile crane operator 1. 11. Hoisting engineer — mobile crane operator 2. 12. Hoisting engineer — tower crane operator. 13. Motorcycle technician. 14. Plumber.

[View source](https://www.ontario.ca/laws/statute/21b28)

### What the source says

> 38 (1) The Ontario College of Trades is continued as a corporation without share capital under the name Skilled Trades Ontario in English and Métiers spécialisés Ontario in French.

## Who regulates it

Regulator

[Skilled Trades Ontario](https://www.skilledtradesontario.ca/)[View source](https://www.ontario.ca/laws/statute/21b28)

### What the source says

> 38 (1) The Ontario College of Trades is continued as a corporation without share capital under the name Skilled Trades Ontario in English and Métiers spécialisés Ontario in French.

Regulator website

[https://www.skilledtradesontario.ca/](https://www.skilledtradesontario.ca/)[View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> An apprenticeship program begins when you sign a Training Agreement with a sponsor and register it with Skilled Trades Ontario.

Statute or rule

Building Opportunities in the Skilled Trades Act, 2021 [View source](https://www.ontario.ca/laws/statute/21b28)

### What the source says

> Search within this document
> Building Opportunities in the Skilled Trades Act, 2021, S.O. 2021, c. 28
> Download Word
> Print
> Versions
> Regulations under this Act
> Revoked/spent regulations under this Act
> CURRENT
> April 2, 2025 - e-Laws currency date(November 11, 2026)
> November 19, 2024 - April 1, 2025
> Show 6 more

## Credential status

Certification status

Compulsory [View source](https://www.ontario.ca/laws/regulation/210876)

### What the source says

> 2. The following trades are classified as compulsory trades for the purposes of the Act: 1. Alignment and brakes technician. 2. Auto body and collision damage repairer. 3. Auto body repairer. 4. Automotive electronic accessory technician. 5. Automotive service technician. 6. Electrician — construction and maintenance. 7. Electrician — domestic and rural. 8. Fuel and electrical systems technician. 9. Hairstylist. 10. Hoisting engineer — mobile crane operator 1. 11. Hoisting engineer — mobile crane operator 2. 12. Hoisting engineer — tower crane operator. 13. Motorcycle technician. 14. Plumber.

Red Seal available

Yes [View source](https://www.red-seal.ca/eng/trades/plumber.shtml)

### What the source says

> Designated Red Seal in: AB, BC, MB, NB, NL, NS, NT, NU, ON, PE, QC, SK, YT

Licensing level

Province [View source](https://www.ontario.ca/laws/statute/21b28)

### What the source says

> (2) The Registrar shall issue to an individual a certificate of qualification in a trade, in a form determined by the Registrar, if the individual,

## Credential levels

### Plumber (306A) Registered Training Agreement [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> An apprenticeship program begins when you sign a Training Agreement with a sponsor and register it with Skilled Trades Ontario.

Scope

A Plumber installs, repairs and maintains piping systems, fixtures and other plumbing equipment used for water distribution, drainage and waste disposal. Specifically, a Plumber: [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> A Plumber installs, repairs and maintains piping systems, fixtures and other plumbing equipment used for water distribution, drainage and waste disposal. Specifically, a Plumber:

Credential type

Apprentice registration [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> An apprenticeship program begins when you sign a Training Agreement with a sponsor and register it with Skilled Trades Ontario.

Certification required

Yes [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> Because this trade is compulsory, to practice this trade legally in Ontario a person must hold a Registered Training Agreement, Provisional Certificate of Qualification or Certificate of Qualification and their information must appear on the Skilled Trades Ontario Public Register.

Experience

8,280 hours [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> at 9,000 (approximately five years), which consists of 8,280 hours on the job work experience and 720 hours of in-school training.

Classroom training

720 hours [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> at 9,000 (approximately five years), which consists of 8,280 hours on the job work experience and 720 hours of in-school training.

Total training

9,000 hours [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> at 9,000 (approximately five years), which consists of 8,280 hours on the job work experience and 720 hours of in-school training.

Minimum age

16 [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> Be at least 16 years old,

Not stated in the official sources we checked: Application fee, Licence fee, Renewal term (years), Continuing education, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Plumber (306A) Certificate of Qualification [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> This trade has a certifying exam. Upon passing the certifying exam, Skilled Trades Ontario issues a Certificate of Qualification in this trade.

Scope

A Plumber installs, repairs and maintains piping systems, fixtures and other plumbing equipment used for water distribution, drainage and waste disposal. Specifically, a Plumber: [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> A Plumber installs, repairs and maintains piping systems, fixtures and other plumbing equipment used for water distribution, drainage and waste disposal. Specifically, a Plumber:

Credential type

Trade certificate [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> This trade has a certifying exam. Upon passing the certifying exam, Skilled Trades Ontario issues a Certificate of Qualification in this trade.

Certification required

Yes [View source](https://www.ontario.ca/laws/regulation/210876)

### What the source says

> 2. The following trades are classified as compulsory trades for the purposes of the Act: 1. Alignment and brakes technician. 2. Auto body and collision damage repairer. 3. Auto body repairer. 4. Automotive electronic accessory technician. 5. Automotive service technician. 6. Electrician — construction and maintenance. 7. Electrician — domestic and rural. 8. Fuel and electrical systems technician. 9. Hairstylist. 10. Hoisting engineer — mobile crane operator 1. 11. Hoisting engineer — mobile crane operator 2. 12. Hoisting engineer — tower crane operator. 13. Motorcycle technician. 14. Plumber.

Experience

8,280 hours [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> at 9,000 (approximately five years), which consists of 8,280 hours on the job work experience and 720 hours of in-school training.

Classroom training

720 hours [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> at 9,000 (approximately five years), which consists of 8,280 hours on the job work experience and 720 hours of in-school training.

Total training

9,000 hours [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> at 9,000 (approximately five years), which consists of 8,280 hours on the job work experience and 720 hours of in-school training.

Exam required

Yes [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> This trade has a certifying exam. Upon passing the certifying exam, Skilled Trades Ontario issues a Certificate of Qualification in this trade.

Exam provider

Skilled Trades Ontario [View source](https://www.skilledtradesontario.ca/certification/exam-scheduling/)

### What the source says

> Skilled Trades Ontario delivers certifying exams in-house and directly manages the exam-day experience. Skilled Trades Ontario will also provide your results and outline your next steps once your exam is completed. Here’s what you need to know:

Exam questions

125 [View source](https://www.red-seal.ca/eng/trades/plumbers/exam-information.shtml)

### What the source says

> Each Red Seal exam's questions are developed to assess the activities laid out in the Red Seal Occupational Standard . This trade's Red Seal exam has 125 questions Footnote * , which are distributed as follows:

Exam fee

$150 CAD [View source](https://www.skilledtradesontario.ca/certification/exam-scheduling/)

### What the source says

> Pay your exam fee of $150 + HST on the Skilled Trades Ontario Portal account and sign into your account to complete payment.

Renewal term (years)

1 [View source](https://www.ontario.ca/laws/regulation/210877)

### What the source says

> 3. The term for a certificate of qualification in a compulsory trade issued under subsection 10 (2) of the Act or renewed under subsection 10 (4) of the Act is one year.

Prerequisite licence

Certificate of Apprenticeship from completed Ontario apprenticeship, or approved Trade Equivalency Assessment [View source](https://www.skilledtradesontario.ca/certification/exam-scheduling/)

### What the source says

> To be eligible to take a certifying exam , you must: Complete an Ontario apprenticeship program in a trade with a certifying exam and receive a Certificate of Apprenticeship after submitting your Completion Form , or Be approved through a Trade Equivalency Assessment by Skilled Trades Ontario. This assessment is for experienced workers who have not completed an apprenticeship in Ontario; and

Alternate route 1

Experienced workers may qualify through an approved Trade Equivalency Assessment instead of completing an Ontario apprenticeship. [View source](https://www.skilledtradesontario.ca/certification/exam-scheduling/)

### What the source says

> Be approved through a Trade Equivalency Assessment by Skilled Trades Ontario. This assessment is for experienced workers who have not completed an apprenticeship in Ontario; and

Alternate route 2

Eligible completed Ontario apprentices receive a waiver for their first written certifying exam attempt. [View source](https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/)

### What the source says

> As a completed Ontario apprentice, you are eligible for a fee waiver for your first attempt at the written exam. The waiver will be automatically applied to your account – no need to contact Skilled Trades Ontario to pay for your first exam.

Alternate route 3

Apprenticeship completion before January 1, 2025 is not eligible for the first-exam waiver. [View source](https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/)

### What the source says

> Apprentices who completed their program before January 1, 2025 are not eligible, even if they take the exam after that date.

Alternate route 4

A Canadian trade certificate, licence or credential must be an authorizing certificate under the Ontario Labour Mobility Act, 2009 and have an equivalent Ontario trade match to be recognized. [View source](https://www.skilledtradesontario.ca/experienced-workers/recognized-canadian-certificates/)

### What the source says

> To be recognized, a trade certificate, license or credential must meet the legal definition of an ‘authorizing certificate’ under the Ontario Labour Mobility Act, 2009 and must have an equivalent trade match in Ontario.

Not stated in the official sources we checked: Exam time (minutes), Passing mark (%), Open book, Application fee, Licence fee, Continuing education, Minimum age, Insurance required, Bond required, Person of record required.

### Plumber (306A) Red Seal Endorsement [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> Red Seal Endorsement – If your trade is part of the Red Seal program, passing the exam means you have demonstrated the knowledge required for the national standard in the trade.

Scope

A Plumber installs, repairs and maintains piping systems, fixtures and other plumbing equipment used for water distribution, drainage and waste disposal. Specifically, a Plumber: [View source](https://www.skilledtradesontario.ca/trade-information/plumber/)

### What the source says

> A Plumber installs, repairs and maintains piping systems, fixtures and other plumbing equipment used for water distribution, drainage and waste disposal. Specifically, a Plumber:

Credential type

Red Seal endorsement [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> Red Seal Endorsement – If your trade is part of the Red Seal program, passing the exam means you have demonstrated the knowledge required for the national standard in the trade.

Exam required

Yes [View source](https://www.red-seal.ca/eng/welcome.shtml)

### What the source says

> To get the Red Seal endorsement, you need to pass the Red Seal exam.

Exam provider

Skilled Trades Ontario [View source](https://www.skilledtradesontario.ca/certification/exam-scheduling/)

### What the source says

> Skilled Trades Ontario delivers certifying exams in-house and directly manages the exam-day experience. Skilled Trades Ontario will also provide your results and outline your next steps once your exam is completed. Here’s what you need to know:

Exam questions

125 [View source](https://www.red-seal.ca/eng/trades/plumbers/exam-information.shtml)

### What the source says

> Each Red Seal exam's questions are developed to assess the activities laid out in the Red Seal Occupational Standard . This trade's Red Seal exam has 125 questions Footnote * , which are distributed as follows:

Exam time (minutes)

240 [View source](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

### What the source says

> The time allowed to write the exam is 4 hours. Find out the number of questions on your trade's exam on the Red Seal website in the trade's Red Seal Exam Breakdowns page and divide that number into 240 minutes.

Passing mark (%)

70 [View source](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

### What the source says

> The Red Seal Exam has a pass mark of 70%.

Not stated in the official sources we checked: Certification required, Open book, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Certificate of Apprenticeship [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> Certificate of Apprenticeship – Issued by Skilled Trades Ontario when you officially complete your apprenticeship program.

Scope

Plumber (306A) after completing the apprenticeship program [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> Certificate of Apprenticeship – Issued by Skilled Trades Ontario when you officially complete your apprenticeship program.

Credential type

Other [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> Certificate of Apprenticeship – Issued by Skilled Trades Ontario when you officially complete your apprenticeship program.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

### Provisional Certificate of Qualification [View source](https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/)

### What the source says

> When you officially complete your apprenticeship program in Ontario in a trade that has a certifying exam , Skilled Trades Ontario will automatically issue you a 1-year   Provisional Certificate of Qualification .

Scope

Plumber (306A) after Ontario apprenticeship completion; in compulsory trades permits continued work while preparing for the certifying exam. [View source](https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/)

### What the source says

> In compulsory trades, this certificate allows you to keep working while you prepare for your exam. The Skilled Trades Ontario Public Register will automatically be updated to reflect your Provisional Certificate of Qualification.

Credential type

Other [View source](https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/)

### What the source says

> When you officially complete your apprenticeship program in Ontario in a trade that has a certifying exam , Skilled Trades Ontario will automatically issue you a 1-year   Provisional Certificate of Qualification .

Prerequisite licence

Officially complete an Ontario apprenticeship in a trade with a certifying exam [View source](https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/)

### What the source says

> When you officially complete your apprenticeship program in Ontario in a trade that has a certifying exam , Skilled Trades Ontario will automatically issue you a 1-year   Provisional Certificate of Qualification .

Alternate route

Where extenuating circumstances prevent scheduling or writing the certifying exam, an application for a 6-month provisional certificate extension may be made. [View source](https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/)

### What the source says

> If extenuating circumstances beyond your control prevent you from scheduling or writing the certifying exam, you may apply for a 6-month extension of your Provisional Certificate of Qualification.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Application fee, Licence fee, Continuing education, Minimum age, Insurance required, Bond required, Person of record required.

## Apprenticeship and code requirements

Apprentice registration required

Yes [View source](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)

### What the source says

> An apprenticeship program begins when you sign a Training Agreement with a sponsor and register it with Skilled Trades Ontario.

Supervision ratio

For prescribed ratio trades: no more than one apprentice for each journeyperson; construction and maintenance, domestic and rural, and plumber are listed in O. Reg. 876/21, section 4. Industrial electrician is not listed. O. Reg. 877/21 provides calculation exceptions. [View source](https://www.ontario.ca/laws/statute/21b28)

### What the source says

> (a) the number of apprentices who may be sponsored or employed by a person in the trade in relation to the number of journeypersons employed or otherwise engaged by the person in the trade shall not exceed one apprentice for each journeyperson; and

Code book

National Building Code of Canada 2020 with Ontario amendments dated October 1, 2026 (Ontario Building Code) [View source](https://www.ontario.ca/laws/regulation/240163)

### What the source says

> 1. The code issued by the Canadian Commission on Building and Fire Codes, part of National Research Council Canada, known as CCBFC NRCC-CONST-56435E, “National Building Code of Canada 2020”, (First Printing), as amended by the document entitled “Ontario Amendments to the National Building Code of Canada 2020”, dated October 1, 2026 and issued by the Ministry of Municipal Affairs and Housing, are together adopted as the building code.

Code edition

National Building Code of Canada 2020 (First Printing) with Ontario amendments dated October 1, 2026 [View source](https://www.ontario.ca/laws/regulation/240163)

### What the source says

> 1. The code issued by the Canadian Commission on Building and Fire Codes, part of National Research Council Canada, known as CCBFC NRCC-CONST-56435E, “National Building Code of Canada 2020”, (First Printing), as amended by the document entitled “Ontario Amendments to the National Building Code of Canada 2020”, dated October 1, 2026 and issued by the Ministry of Municipal Affairs and Housing, are together adopted as the building code.

## Moving with it

Mobility

If credentials are verified through the recognized-Canadian-certificate process, no further training or examination is required to obtain a Skilled Trades Ontario Certificate of Qualification. [View source](https://www.skilledtradesontario.ca/experienced-workers/recognized-canadian-certificates/)

### What the source says

> If your credentials are verified through this process, you will not need to complete further training or examination to obtain your Certificate of Qualification from Skilled Trades Ontario.

## Prepare

[Practice exam for the Red Seal Plumber examination](https://tradecredentialregistry.com/practice-exams/306a-plumber/)

## Ontario records by trade code

- [306A](https://tradecredentialregistry.com/canada/ontario/306a-plumber/)

## Sources

Last checked 2026-11-16

1. 1. [https://www.ontario.ca/laws/statute/21b28](https://www.ontario.ca/laws/statute/21b28)
2. 2. [https://www.ontario.ca/laws/regulation/210876](https://www.ontario.ca/laws/regulation/210876)
3. 3. [https://www.red-seal.ca/eng/trades/plumber.shtml](https://www.red-seal.ca/eng/trades/plumber.shtml)
4. 4. [https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/](https://www.skilledtradesontario.ca/apprenticeship/starting-your-apprenticeship/)
5. 5. [https://www.skilledtradesontario.ca/](https://www.skilledtradesontario.ca/)
6. 6. [https://www.ontario.ca/laws/regulation/240163](https://www.ontario.ca/laws/regulation/240163)
7. 7. [https://www.skilledtradesontario.ca/trade-information/plumber/](https://www.skilledtradesontario.ca/trade-information/plumber/)
8. 8. [https://www.skilledtradesontario.ca/certification/exam-scheduling/](https://www.skilledtradesontario.ca/certification/exam-scheduling/)
9. 9. [https://www.red-seal.ca/eng/trades/plumbers/exam-information.shtml](https://www.red-seal.ca/eng/trades/plumbers/exam-information.shtml)
10. 10. [https://www.ontario.ca/laws/regulation/210877](https://www.ontario.ca/laws/regulation/210877)
11. 11. [https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/](https://www.skilledtradesontario.ca/apprenticeship/provisional-certificate-of-qualification/)
12. 12. [https://www.skilledtradesontario.ca/experienced-workers/recognized-canadian-certificates/](https://www.skilledtradesontario.ca/experienced-workers/recognized-canadian-certificates/)
13. 13. [https://www.red-seal.ca/eng/welcome.shtml](https://www.red-seal.ca/eng/welcome.shtml)
14. 14. [https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml](https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml)

---

Source: https://tradecredentialregistry.com/canada/ontario/plumber/
