Canada · Official-source record
Electrician licence requirements in British Columbia
In British Columbia, certification for electricians is compulsory, through SkilledTradesBC.
View sourceWhat the source says
For the purposes of section 27 (1) [designation and scope of work of skilled trades certification trades] of the Act, each of the following trades is designated as a skilled trades certification trade, effective December 1, 2023: (a) construction electrician; (b) industrial electrician; (c) powerline technician; (d) sheet metal worker; (e) gasfitter — Class A; (f) gasfitter — Class B; (g) steamfitter/pipefitter; (h) refrigeration and air conditioning mechanic.
What the source says
Electrician, Construction | SkilledTradesBC
Who regulates it
- Regulator
- SkilledTradesBCView source
What the source says
Electrician, Construction | SkilledTradesBC
- Regulator website
- https://skilledtradesbc.ca/View source
What the source says
SkilledTradesBC
- Statute or rule
- Skilled Trades BC Regulation, B.C. Reg. 252/2022View source
What the source says
B.C. Reg. 252/2022
Credential status
- Certification status
- CompulsoryView source
What the source says
For the purposes of section 27 (1) [designation and scope of work of skilled trades certification trades] of the Act, each of the following trades is designated as a skilled trades certification trade, effective December 1, 2023: (a) construction electrician; (b) industrial electrician; (c) powerline technician; (d) sheet metal worker; (e) gasfitter — Class A; (f) gasfitter — Class B; (g) steamfitter/pipefitter; (h) refrigeration and air conditioning mechanic.
- Red Seal available
- YesView source
What the source says
Construction Electrician
- Licensing level
- ProvinceView source
What the source says
Construction Electrician is a Skilled Trades Certification trade, also known as a compulsory trade, in British Columbia.
Credential levels
Construction Electrician Apprentice RegistrationView sourceWhat the source says
Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.
What the source says
Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.
- Scope
- Work in the Construction Electrician trade as a registered apprenticeView source
What the source says
A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;
- Credential type
- Apprentice registrationView source
What the source says
Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.
- Certification required
- YesView source
What the source says
A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;
- Alternate route
- Level 4 apprentices in this program are exempt from the 2:1 supervision ratio.View source
What the source says
The ratio of apprentice to journeyperson is 2:1. This applies to apprentices in Levels 1, 2 and 3. Apprentices in Level 4 are exempt from the ratio.
Not stated in the official sources we checked: Experience, Classroom training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.
Construction Electrician Certificate of QualificationView sourceWhat the source says
Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
What the source says
Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
- Scope
- Construction Electrician work as a SkilledTradesBC-certified journeypersonView source
What the source says
Construction electricians plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems.
- Credential type
- Trade certificateView source
What the source says
Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
- Certification required
- YesView source
What the source says
(1) A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28; (b) a person who is registered as an apprentice under a law similar to this Act in another Canadian jurisdiction; (c) a journeyperson;
- Experience
- 6,000 hoursView source
What the source says
Work-Based Training: 6,000 hours total
- Exam required
- YesView source
What the source says
Interprovincial Red Seal Exam Minimum 70%
- Exam provider
- SkilledTradesBCView source
What the source says
When you are ready to book your exam, sign into the Portal and navigate to the Exam Booking section.
- Exam questions
- 100View source
What the source says
This trade's Red Seal exam has 100 questions
- Passing mark (%)
- 70View source
What the source says
Interprovincial Red Seal Exam Minimum 70%
- Alternate route 1
- Trade Qualifier challenge application: 9,000 documented hours of directly related experience working in the occupation.View source
What the source says
9,000 documented hours of directly related experience working in the occupation
- Alternate route 2
- Trade Qualifier pathway with Temporary Authorization while preparing for the certification exam.View source
What the source says
Apply for Temporary Authorization to continue working in your trade as a Trade Qualifier preparing to write your certification exam.
- Alternate route 3
- Challenge-the-certification-exam route: application fee of $120 paid through the Portal.View source
What the source says
Pay the $120 application fee through the Portal and submit your application and declaration form(s).
Not stated in the official sources we checked: Classroom training, Exam time (minutes), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.
Interprovincial Red Seal endorsement, Construction ElectricianView sourceWhat the source says
Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
What the source says
Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
- Scope
- Interprovincial Red Seal endorsement for Construction ElectricianView source
What the source says
Designated Red Seal in: AB, BC, MB, NB, NL, NS, NT, NU, ON, PE, QC, SK, YT
- Credential type
- Red Seal endorsementView source
What the source says
Construction Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
- Exam required
- YesView source
What the source says
To get the Red Seal endorsement, you need to pass the Red Seal exam.
- Exam provider
- Provincial and territorial apprenticeship and certification authoritiesView source
What the source says
Red Seal Exams are administered by provincial and territorial apprenticeship and certification authorities.
- Exam questions
- 100View source
What the source says
This trade's Red Seal exam has 100 questions
- Exam time (minutes)
- 240View source
What the source says
Find out the number of questions on your trade's exam on the Red Seal website in the trade's Red Seal Exam Breakdowns page and divide that number into 240 minutes.
- Passing mark (%)
- 70View source
What the source says
The Red Seal Exam has a pass mark of 70%.
Not stated in the official sources we checked: Certification required, Experience, Classroom training, Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.
Industrial Electrician Apprentice RegistrationView sourceWhat the source says
Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.
What the source says
Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.
- Scope
- Work in the Industrial Electrician trade as a registered apprenticeView source
What the source says
A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;
- Credential type
- Apprentice registrationView source
What the source says
Individuals who wish to begin an apprenticeship in this program must register with SkilledTradesBC along with their sponsor.
- Certification required
- YesView source
What the source says
A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;
- Alternate route
- Level 4 apprentices in this program are exempt from the 2:1 supervision ratio.View source
What the source says
The ratio of apprentice to journeyperson is 2:1. This applies to apprentices in Levels 1, 2 and 3. Apprentices in Level 4 are exempt from the ratio.
Not stated in the official sources we checked: Experience, Classroom training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.
Industrial Electrician Certificate of QualificationView sourceWhat the source says
Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
What the source says
Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
- Scope
- Industrial Electrician work as a SkilledTradesBC-certified journeypersonView source
What the source says
Industrial electricians install, maintain, test, troubleshoot, service and repair industrial electrical equipment and associated electrical protection and controls.
- Credential type
- Trade certificateView source
What the source says
Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
- Certification required
- YesView source
What the source says
(1) A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28; (b) a person who is registered as an apprentice under a law similar to this Act in another Canadian jurisdiction; (c) a journeyperson;
- Experience
- 6,000 hoursView source
What the source says
Work-Based Training: 6,000 hours total
- Exam required
- YesView source
What the source says
Interprovincial Red Seal Exam Minimum 70%
- Exam provider
- SkilledTradesBCView source
What the source says
When you are ready to book your exam, sign into the Portal and navigate to the Exam Booking section.
- Exam questions
- 100View source
What the source says
This trade's Red Seal exam has 100 questions
- Passing mark (%)
- 70View source
What the source says
Interprovincial Red Seal Exam Minimum 70%
- Alternate route 1
- Trade Qualifier challenge application: 9,000 documented hours of directly related experience working in the occupation.View source
What the source says
9,000 documented hours of directly related experience working in the occupation
- Alternate route 2
- Trade Qualifier pathway with Temporary Authorization while preparing for the certification exam.View source
What the source says
Apply for Temporary Authorization to continue working in your trade as a Trade Qualifier preparing to write your certification exam.
- Alternate route 3
- Challenge-the-certification-exam route: application fee of $120 paid through the Portal.View source
What the source says
Pay the $120 application fee through the Portal and submit your application and declaration form(s).
Not stated in the official sources we checked: Classroom training, Exam time (minutes), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.
Interprovincial Red Seal endorsement, Industrial ElectricianView sourceWhat the source says
Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
What the source says
Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
- Scope
- Interprovincial Red Seal endorsement for Industrial ElectricianView source
What the source says
Designated Red Seal in: BC, MB, NB, NL, NS, NT, ON, PE, QC, YT
- Credential type
- Red Seal endorsementView source
What the source says
Industrial Electrician – Certificate of Qualification with Interprovincial Red Seal endorsement
- Exam required
- YesView source
What the source says
To get the Red Seal endorsement, you need to pass the Red Seal exam.
- Exam provider
- Provincial and territorial apprenticeship and certification authoritiesView source
What the source says
Red Seal Exams are administered by provincial and territorial apprenticeship and certification authorities.
- Exam questions
- 100View source
What the source says
This trade's Red Seal exam has 100 questions
- Exam time (minutes)
- 240View source
What the source says
Find out the number of questions on your trade's exam on the Red Seal website in the trade's Red Seal Exam Breakdowns page and divide that number into 240 minutes.
- Passing mark (%)
- 70View source
What the source says
The Red Seal Exam has a pass mark of 70%.
Not stated in the official sources we checked: Certification required, Experience, Classroom training, Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.
Electrical Field Safety Representative (FSR), Class AView sourceWhat the source says
The Class A field safety representative (FSR) certificate of qualification
What the source says
The Class A field safety representative (FSR) certificate of qualification
- Scope
- The Class A field safety representative (FSR) certificate of qualification allows you to submit declarations on behalf of your employer for any type of regulated electrical workView source
What the source says
The Class A field safety representative (FSR) certificate of qualification allows you to submit declarations on behalf of your employer for any type of regulated electrical work. There are no voltage or ampere limitations.
- Credential type
- OtherView source
What the source says
Class A, class B and class C certificates of qualification as a field safety representative are established.
- Certification required
- YesView source
What the source says
An FSR must be named on every electrical permit application.
- Experience
- 3,600 hoursView source
What the source says
A minimum of two years (3,600 hours) relevant electrical work experience under the Canadian Electrical Code, after receiving a Certificate of Qualification in the trade of Electrician.
- Exam required
- YesView source
What the source says
The class A FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Exam provider
- Technical Safety BCView source
What the source says
Electrical FSR Certification
- Exam questions
- 60View source
What the source says
The class A FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Passing mark (%)
- 70View source
What the source says
The class A FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Open book
- YesView source
What the source says
The class A FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Application fee
- $340 CADView source
What the source says
Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes
- Exam fee
- $193 CADView source
What the source says
Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes
- Renewal term (years)
- 3View source
What the source says
FSR certificates must be renewed every 3 years.
- Continuing education
- 8 hoursView source
What the source says
Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.
- Prerequisite licence
- SkilledTradesBC certificate-holder route, s. 8: appropriate electrical certificate, required electrical-code course, examination and acceptable work experience. Sections 9 and 10 provide alternate applied-technologist and professional-engineer routes.View source
What the source says
In order to obtain a certificate of qualification for Class A, B or C as a field safety representative under section 7, an individual must (a) hold an appropriate SkilledTradesBC certificate, (b) complete a course in the application of electrical codes and standards required by the provincial safety manager, (c) pass an examination required by the provincial safety manager, and (d) have work experience acceptable to a provincial safety manager.
- Alternate route 1
- FSR certificate renewal: 2026 base fee $128 + GST; the schedule marks GST applicable (Yes).View source
What the source says
Field safety representative (FSR) certificate renewal4 & 5 $128 $134 per unit Yes
- Alternate route 2
- FSR evaluation before examination: 2026 base fee $340 + GST; non-refundable; GST applicable (Yes).View source
What the source says
Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes
- Alternate route 3
- FSR in-person exam: 2026 base fee $193 + GST; GST applicable (Yes).View source
What the source says
Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes
- Alternate route 4
- FSR remote exam alternative: 2026 base fee $183 + GST; GST applicable (Yes).View source
What the source says
Certificate of Qualification exam (Digital, Remote): New field safety representative (FSR)1, 2,& 3, Electrical safety officer (ESO)1 & 2 $183 $192 per unit Yes
- Alternate route 5
- Applied science technologist route, s. 9(1): electrical engineering technology qualifications, applied science technologist registration under the Professional Governance Act, required electrical-code course and examination.View source
What the source says
(a) holds qualifications in electrical engineering technology, (b) is registered as an applied science technologist under the Professional Governance Act , (c) completes a course in the application of electrical codes and standards required by a provincial safety manager, and (d) passes an examination required by the provincial safety manager.
- Alternate route 6
- Professional engineer route, s. 10(1): electrical engineering qualifications, membership in good standing with the Association of Professional Engineers and Geoscientists of British Columbia, and required examination.View source
What the source says
An individual who holds qualifications in electrical engineering and is a member in good standing with the Association of Professional Engineers and Geoscientists of British Columbia may apply to a provincial safety manager to obtain a certificate of qualification as a field safety representative in one of the classes of certificate of qualifications as a field safety representative referred to in section 7 if the individual passes an examination required by the provincial safety manager.
- Alternate route 7
- Applied technologist Class A or B: two years of acceptable work experience after a Class C FSR certificate, or three years of acceptable work experience with installations over 150 volts to ground.View source
What the source says
(a) 2 years of work experience, acceptable to a provincial safety manager, after receiving a class C certificate of qualification as a field safety representative, or (b) 3 years of work experience, acceptable to a provincial safety manager, with electrical installations in which the voltage of installation is more than 150 volts to ground.
- Alternate route 8
- Professional engineer Class A or B: two years of work experience acceptable to a provincial safety manager.View source
What the source says
A professional engineer who applies for a class A or class B certificate of qualification as a field safety representative must have two years of work experience acceptable to a provincial safety manager.
- Alternate route 9
- The electrical-code course for the trade-certificate route must have been completed within three years of the application date.View source
What the source says
a recognized electrical course in the application of electrical codes and standards, from a recognized training provider or instructor, completed within three years of application date.
- Alternate route 10
- Class A/B/C renewal: complete at least 8 hours of continuing education or pass the required examination, subject to s. 10.1(5).View source
What the source says
Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.
- Alternate route 11
- If the holder fails the initial renewal examination attempt, renewal requires the applicable continuing-education hours (8 for Class A/B/C).View source
What the source says
Despite section 3 of the Safety Standards General Regulation, if a certificate holder fails on the initial attempt to pass an examination referred to in this section, the holder's certificate of qualification may not be renewed unless the certificate holder completes the applicable number of hours of continuing education required under this section.
- Alternate route 12
- The SkilledTradesBC certificate-holder route for Class A also requires three high voltage installations, s. 8(2).View source
What the source says
In order to obtain a class A certificate of qualification as a field safety representative under this section, an individual must also complete three high voltage installations.
Not stated in the official sources we checked: Classroom training, Exam time (minutes), Licence fee, Minimum age, Insurance required, Bond required, Person of record required.
Electrical Field Safety Representative (FSR), Class BView sourceWhat the source says
The Class B Field Safety Representative (FSR) certificate of qualification
What the source says
The Class B Field Safety Representative (FSR) certificate of qualification
- Scope
- Class B FSR declarations: completed electrical installations with voltage not exceeding 1000 volts, including 1000 volts.View source
What the source says
The holder of a class B certificate of qualification may make declarations only with respect to electrical installations in which the voltage of the completed installation does not exceed 1 000 volts.
- Credential type
- OtherView source
What the source says
Class A, class B and class C certificates of qualification as a field safety representative are established.
- Certification required
- YesView source
What the source says
An FSR must be named on every electrical permit application.
- Experience
- 1,800 hoursView source
What the source says
A minimum one year (1,800 hours) relevant, acceptable electrical work experience under the Canadian Electrical Code, after receiving a Certificate of Qualification in the Trade of Electrician.
- Exam required
- YesView source
What the source says
The class B FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Exam provider
- Technical Safety BCView source
What the source says
Electrical FSR Certification
- Exam questions
- 60View source
What the source says
The class B FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Passing mark (%)
- 70View source
What the source says
The class B FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Open book
- YesView source
What the source says
The class B FSR exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Application fee
- $340 CADView source
What the source says
Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes
- Exam fee
- $193 CADView source
What the source says
Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes
- Renewal term (years)
- 3View source
What the source says
FSR certificates must be renewed every 3 years.
- Continuing education
- 8 hoursView source
What the source says
Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.
- Prerequisite licence
- SkilledTradesBC certificate-holder route, s. 8: appropriate electrical certificate, required electrical-code course, examination and acceptable work experience. Sections 9 and 10 provide alternate applied-technologist and professional-engineer routes.View source
What the source says
In order to obtain a certificate of qualification for Class A, B or C as a field safety representative under section 7, an individual must (a) hold an appropriate SkilledTradesBC certificate, (b) complete a course in the application of electrical codes and standards required by the provincial safety manager, (c) pass an examination required by the provincial safety manager, and (d) have work experience acceptable to a provincial safety manager.
- Alternate route 1
- FSR certificate renewal: 2026 base fee $128 + GST; the schedule marks GST applicable (Yes).View source
What the source says
Field safety representative (FSR) certificate renewal4 & 5 $128 $134 per unit Yes
- Alternate route 2
- FSR evaluation before examination: 2026 base fee $340 + GST; non-refundable; GST applicable (Yes).View source
What the source says
Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes
- Alternate route 3
- FSR in-person exam: 2026 base fee $193 + GST; GST applicable (Yes).View source
What the source says
Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes
- Alternate route 4
- FSR remote exam alternative: 2026 base fee $183 + GST; GST applicable (Yes).View source
What the source says
Certificate of Qualification exam (Digital, Remote): New field safety representative (FSR)1, 2,& 3, Electrical safety officer (ESO)1 & 2 $183 $192 per unit Yes
- Alternate route 5
- Applied science technologist route, s. 9(1): electrical engineering technology qualifications, applied science technologist registration under the Professional Governance Act, required electrical-code course and examination.View source
What the source says
(a) holds qualifications in electrical engineering technology, (b) is registered as an applied science technologist under the Professional Governance Act , (c) completes a course in the application of electrical codes and standards required by a provincial safety manager, and (d) passes an examination required by the provincial safety manager.
- Alternate route 6
- Professional engineer route, s. 10(1): electrical engineering qualifications, membership in good standing with the Association of Professional Engineers and Geoscientists of British Columbia, and required examination.View source
What the source says
An individual who holds qualifications in electrical engineering and is a member in good standing with the Association of Professional Engineers and Geoscientists of British Columbia may apply to a provincial safety manager to obtain a certificate of qualification as a field safety representative in one of the classes of certificate of qualifications as a field safety representative referred to in section 7 if the individual passes an examination required by the provincial safety manager.
- Alternate route 7
- Applied technologist Class A or B: two years of acceptable work experience after a Class C FSR certificate, or three years of acceptable work experience with installations over 150 volts to ground.View source
What the source says
(a) 2 years of work experience, acceptable to a provincial safety manager, after receiving a class C certificate of qualification as a field safety representative, or (b) 3 years of work experience, acceptable to a provincial safety manager, with electrical installations in which the voltage of installation is more than 150 volts to ground.
- Alternate route 8
- Professional engineer Class A or B: two years of work experience acceptable to a provincial safety manager.View source
What the source says
A professional engineer who applies for a class A or class B certificate of qualification as a field safety representative must have two years of work experience acceptable to a provincial safety manager.
- Alternate route 9
- The electrical-code course for the trade-certificate route must have been completed within three years of the application date.View source
What the source says
a recognized electrical course in the application of electrical codes and standards, from a recognized training provider or instructor, completed within three years of application date.
- Alternate route 10
- Class A/B/C renewal: complete at least 8 hours of continuing education or pass the required examination, subject to s. 10.1(5).View source
What the source says
Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.
- Alternate route 11
- If the holder fails the initial renewal examination attempt, renewal requires the applicable continuing-education hours (8 for Class A/B/C).View source
What the source says
Despite section 3 of the Safety Standards General Regulation, if a certificate holder fails on the initial attempt to pass an examination referred to in this section, the holder's certificate of qualification may not be renewed unless the certificate holder completes the applicable number of hours of continuing education required under this section.
Not stated in the official sources we checked: Classroom training, Exam time (minutes), Licence fee, Minimum age, Insurance required, Bond required, Person of record required.
Electrical Field Safety Representative (FSR), Class CView sourceWhat the source says
The Class C field safety representative (FSR) certificate of qualification
What the source says
The Class C field safety representative (FSR) certificate of qualification
- Scope
- Class C FSR declarations: current not exceeding 200 amps and voltage not exceeding 150 volts to ground, single phase power; both boundary values are included.View source
What the source says
The holder of a class C certificate of qualification may make declarations only with respect to electrical installations in which the current and voltage in the installation do not exceed current of 200 amps and voltage of 150 volts to ground, single phase power.
- Credential type
- OtherView source
What the source says
Class A, class B and class C certificates of qualification as a field safety representative are established.
- Certification required
- YesView source
What the source says
An FSR must be named on every electrical permit application.
- Experience
- 1,800 hoursView source
What the source says
You must have a minimum of one year (1,800 hours) of acceptable relevant electrical work experience under the Canadian Electrical Code, after receiving a Certificate of Qualification in the Trade of Electrician.
- Exam required
- YesView source
What the source says
The class C exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Exam provider
- Technical Safety BCView source
What the source says
Electrical FSR Certification
- Exam questions
- 60View source
What the source says
The class C exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Passing mark (%)
- 70View source
What the source says
The class C exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Open book
- YesView source
What the source says
The class C exam takes 3.5 hours. It is open book and is made up of 60 multiple choice questions, with a 35% focus on Act, Regulations, and Directive, and a 65% focus on Code. You must achieve a minimum grade of 70% to pass.
- Application fee
- $340 CADView source
What the source says
Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes
- Exam fee
- $193 CADView source
What the source says
Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes
- Renewal term (years)
- 3View source
What the source says
FSR certificates must be renewed every 3 years.
- Continuing education
- 8 hoursView source
What the source says
Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.
- Prerequisite licence
- SkilledTradesBC certificate-holder route, s. 8: appropriate electrical certificate, required electrical-code course, examination and acceptable work experience. Sections 9 and 10 provide alternate applied-technologist and professional-engineer routes.View source
What the source says
In order to obtain a certificate of qualification for Class A, B or C as a field safety representative under section 7, an individual must (a) hold an appropriate SkilledTradesBC certificate, (b) complete a course in the application of electrical codes and standards required by the provincial safety manager, (c) pass an examination required by the provincial safety manager, and (d) have work experience acceptable to a provincial safety manager.
- Alternate route 1
- FSR certificate renewal: 2026 base fee $128 + GST; the schedule marks GST applicable (Yes).View source
What the source says
Field safety representative (FSR) certificate renewal4 & 5 $128 $134 per unit Yes
- Alternate route 2
- FSR evaluation before examination: 2026 base fee $340 + GST; non-refundable; GST applicable (Yes).View source
What the source says
Evaluation of qualification prior to examination (non-refundable) $340 $357 per unit Yes
- Alternate route 3
- FSR in-person exam: 2026 base fee $193 + GST; GST applicable (Yes).View source
What the source says
Certificate of Qualification exam (Digital, In-person): New field safety representative (FSR)1, 2,& 3, electrical safety officer (ESO)1 & 2 $193 $203 per unit Yes
- Alternate route 4
- FSR remote exam alternative: 2026 base fee $183 + GST; GST applicable (Yes).View source
What the source says
Certificate of Qualification exam (Digital, Remote): New field safety representative (FSR)1, 2,& 3, Electrical safety officer (ESO)1 & 2 $183 $192 per unit Yes
- Alternate route 5
- Applied science technologist route, s. 9(1): electrical engineering technology qualifications, applied science technologist registration under the Professional Governance Act, required electrical-code course and examination.View source
What the source says
(a) holds qualifications in electrical engineering technology, (b) is registered as an applied science technologist under the Professional Governance Act , (c) completes a course in the application of electrical codes and standards required by a provincial safety manager, and (d) passes an examination required by the provincial safety manager.
- Alternate route 6
- Professional engineer route, s. 10(1): electrical engineering qualifications, membership in good standing with the Association of Professional Engineers and Geoscientists of British Columbia, and required examination.View source
What the source says
An individual who holds qualifications in electrical engineering and is a member in good standing with the Association of Professional Engineers and Geoscientists of British Columbia may apply to a provincial safety manager to obtain a certificate of qualification as a field safety representative in one of the classes of certificate of qualifications as a field safety representative referred to in section 7 if the individual passes an examination required by the provincial safety manager.
- Alternate route 7
- Applied technologist Class C: one year of work experience acceptable to a provincial safety manager.View source
What the source says
An applied technologist who applies for a class C certificate of qualification as a field safety representative must have one year of work experience acceptable to a provincial safety manager.
- Alternate route 8
- The electrical-code course for the trade-certificate route must have been completed within three years of the application date.View source
What the source says
a recognized electrical course in the application of electrical codes and standards, from a recognized training provider or instructor, completed within three years of application date.
- Alternate route 9
- Class A/B/C renewal: complete at least 8 hours of continuing education or pass the required examination, subject to s. 10.1(5).View source
What the source says
Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager.
- Alternate route 10
- If the holder fails the initial renewal examination attempt, renewal requires the applicable continuing-education hours (8 for Class A/B/C).View source
What the source says
Despite section 3 of the Safety Standards General Regulation, if a certificate holder fails on the initial attempt to pass an examination referred to in this section, the holder's certificate of qualification may not be renewed unless the certificate holder completes the applicable number of hours of continuing education required under this section.
Not stated in the official sources we checked: Classroom training, Exam time (minutes), Licence fee, Minimum age, Insurance required, Bond required, Person of record required.
Technical Safety BC Electrical Contractor LicenceView sourceWhat the source says
licensed electrical contractor
What the source says
licensed electrical contractor
- Scope
- Electrical contractor businesses performing regulated electrical work in British ColumbiaView source
What the source says
In order to perform regulated electrical work in BC, you must either be licensed by Technical Safety BC, employed by a Technical Safety BC licensed electrical contractor, or authorized to perform work yourself.
- Credential type
- Contractor licenceView source
What the source says
A licensed contractor is responsible for ensuring compliance with:
- Certification required
- YesView source
What the source says
In order to perform regulated electrical work in BC, you must either be licensed by Technical Safety BC, employed by a Technical Safety BC licensed electrical contractor, or authorized to perform work yourself.
- Licence fee
- $267 CADView source
What the source says
Electrical Contractor Licence - New $267 $280 per unit No
- Renewal term (years)
- 1View source
What the source says
Licences must be renewed annually.
- Prerequisite licence
- Active FSR certificate of qualification designated on the electrical-contractor licenceView source
What the source says
The FSR must hold an active certificate to be designated. The scope of your licence will be limited to the class of the designated FSR’s certificate of qualification.
- Bond required
- YesView source
What the source says
You will need to have a surety bond
- Person of record required
- YesView source
What the source says
You will be asked to declare a designated Field Safety Representative (FSR) on your licence.
- Alternate route
- Electrical contractor licence renewal fee: $222 (2026 schedule rate, per unit)View source
What the source says
Electrical Contractor Licence - Renewal $222 $233 per unit No
Not stated in the official sources we checked: Experience, Classroom training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Continuing education, Minimum age, Insurance required.
Apprenticeship and code requirements
- Apprentice registration required
- YesView source
What the source says
A person must not work in a skilled trades certification trade unless the person is one of the following: (a) a person who is registered as an apprentice under section 28;
- Supervision ratio
- 2:1 apprentices to journeypersons for all skilled-trades certification trades.View source
What the source says
For the purposes of section 32 (2) [supervision ratios] of the Act, the supervision ratio of apprentices to journeypersons is 2:1 for all skilled trades certification trades.
- Code book
- B.C. Electrical Code (Canadian Electrical Code Part I)View source
What the source says
The Canadian Electrical Code, Part I, Twenty-sixth Edition, Safety Standard for Electrical Installations, Canadian Standards Association Standard C22.1:24, amended as set out in the Schedule to this regulation and including any errata, is adopted by reference as the B.C. Electrical Code.
- Code edition
- Twenty-sixth Edition, CSA C22.1:24View source
What the source says
The Canadian Electrical Code, Part I, Twenty-sixth Edition, Safety Standard for Electrical Installations, Canadian Standards Association Standard C22.1:24, amended as set out in the Schedule to this regulation and including any errata, is adopted by reference as the B.C. Electrical Code.
Moving with it
- Mobility
- SkilledTradesBC recognizes Canadian trade-board Certificates of Qualification without recertification or reissue; certain trades have additional local safety-authority requirements.View source
What the source says
If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate. For certain trades, you will need to contact the local safety authority as they have additional licenses and requirements to work within B.C.
Prepare
Practice exam for the Red Seal Construction Electrician examination
Sources
Last checked
- 1. https://skilledtradesbc.ca/electrician-construction
- 2. https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/252_2022
- 3. https://red-seal.ca/eng/trades/trades-list.shtml
- 4. https://skilledtradesbc.ca/
- 5. https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/22004
- 6. https://www.bclaws.gov.bc.ca/civix/document/id/complete/statreg/100_2004
- 7. https://skilledtradesbc.ca/media/2216/download
- 8. https://red-seal.ca/eng/trades/const-elect.shtml
- 9. https://skilledtradesbc.ca/challenge-certification-exam
- 10. https://red-seal.ca/eng/trades/constelectric/exam-information.shtml
- 11. https://skilledtradesbc.ca/skilledtradescertification
- 12. https://www.red-seal.ca/eng/welcome.shtml
- 13. https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml
- 14. https://skilledtradesbc.ca/media/2217/download
- 15. https://red-seal.ca/eng/trades/indust-elect.shtml
- 16. https://red-seal.ca/eng/trades/industrialelectric/exam-information.shtml
- 17. https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-a
- 18. https://www.technicalsafetybc.ca/technologies/electrical/installation-permits
- 19. https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/exam-information
- 20. https://files.technicalsafetybc.ca/v3/assets/bltdec2ded849740f4d/bltbf19fcfa174c51a3/6ab172ada2b3c138e4c7ecf5/Fee_Schedule_-_Electrical_-_2027.pdf
- 21. https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-b
- 22. https://www.technicalsafetybc.ca/technologies/electrical/electrical-FSR-certification/class-c
- 23. https://www.technicalsafetybc.ca/technologies/electrical/electrical-licences
- 24. https://skilledtradesbc.ca/labour-mobility