Canada · Official-source record

Electrician licence requirements in Newfoundland and Labrador

In Newfoundland and Labrador, certification is compulsory for some electrician scopes and voluntary for others.

View source
What the source says
Compulsory trades involve work where public or employee safety could be at risk. There are currently five compulsory trades: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator, and Tower Crane Operator.

Who regulates it

Regulator
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
The Apprenticeship and Trades Certification Division (ATCD) is responsible for apprenticeship training and certification programs in Newfoundland and Labrador for individuals pursuing a career in the skilled trades.
Regulator website
https://www.gov.nl.ca/atcd/View source
What the source says
The Apprenticeship and Trades Certification Division (ATCD) is responsible for apprenticeship training and certification programs in Newfoundland and Labrador for individuals pursuing a career in the skilled trades.
Statute or rule
Apprenticeship and Certification Act, SNL 1999, Chapter A-12.1View source
What the source says
APPRENTICESHIP AND CERTIFICATION ACT

Credential status

Certification status
MixedView source
What the source says
Compulsory trades involve work where public or employee safety could be at risk. There are currently five compulsory trades: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator, and Tower Crane Operator.
Red Seal available
YesView source
What the source says
Designated Red Seal in: AB, BC, MB, NB, NL, NS, NT, NU, ON, PE, QC, SK, YT
Licensing level
ProvinceView source
What the source says
The Apprenticeship and Trades Certification Division (ATCD) is responsible for apprenticeship training and certification programs in Newfoundland and Labrador for individuals pursuing a career in the skilled trades.

Credential levels

Construction Electrician Registered ApprenticeView source
What the source says
STEP 3 – Get Your Registration Card and Logbook: Once your application is approved, you will become a registered apprentice. You will receive a notification of acceptance, along with a registration card and an official logbook.

Scope
Construction electricians plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems that provide heating, lighting, power, alarm, security, communication and control in residential, commercial, institutional, industrial, transportation and entertainment environments.View source
What the source says
Construction electricians plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems that provide heating, lighting, power, alarm, security, communication and control in residential, commercial, institutional, industrial, transportation and entertainment environments.
Credential type
Apprentice registrationView source
What the source says
STEP 3 – Get Your Registration Card and Logbook: Once your application is approved, you will become a registered apprentice. You will receive a notification of acceptance, along with a registration card and an official logbook.
Certification required
YesView source
What the source says
To work in compulsory trades, individuals must have a Certificate of Qualification or be a registered apprentice with the Apprenticeship and Trades Certification Division (ATCD).
Total training
7,200 hoursView source
What the source says
Apprenticeship Term: 4 years, 7200 hours (Plan of Training – 2025) Level 1 Level 2 Level 3 Level 4 Pre-Employment (37 wks) 9 weeks 8 weeks 7 weeks 10 weeks** 9 weeks 8 weeks 7 weeks Apprenticeship Term: 4 years, 7200 hours (Plan of Training – 2017) Level 1 Level 2 Level 3 Level 4 Pre-Employment (37 wks) 10 weeks 9 weeks 8 weeks 10 weeks** 10 weeks 9 weeks 8 weeks **Refer to the Pathways to Certification diagram Opens in new window Trade Resources
Alternate route 1
Mature applicants aged 19 may be registered at the Director’s discretion if they demonstrate ability and interest; high-school or equivalent entrance requirements otherwise apply.View source
What the source says
2.2 Notwithstanding the above, each candidate must have successfully completed a high school program or equivalent, and in addition may be required to have completed certain academic subjects as specified in a particular plan of training. Mature students, at the discretion of the Director of Apprenticeship and Trades Certification, may be registered. A mature student is defined as one who has reached the age of 19 and who can demonstrate the ability and the interest to complete the requirements for certification.
Alternate route 2
Credit may be granted for previous work experience or training validated through prior learning assessment.View source
What the source says
2.3 At the discretion of the Director of Apprenticeship and Trades Certification, credit toward the apprenticeship program may be awarded to an apprentice for previous work experience and/or training as validated through prior learning assessment.

Not stated in the official sources we checked: Experience, Classroom training, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Construction Electrician Certificate of QualificationView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .

Scope
Construction electricians plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems that provide heating, lighting, power, alarm, security, communication and control in residential, commercial, institutional, industrial, transportation and entertainment environments.View source
What the source says
Construction electricians plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems that provide heating, lighting, power, alarm, security, communication and control in residential, commercial, institutional, industrial, transportation and entertainment environments.
Credential type
Trade certificateView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .
Certification required
YesView source
What the source says
Compulsory trades involve work where public or employee safety could be at risk. There are currently five compulsory trades: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator, and Tower Crane Operator.
Exam required
YesView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .
Exam provider
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
If approved, your exam can be rescheduled during one of the monthly rewrites at an Apprenticeship and Trades Certification Division (ATCD) regional office.
Passing mark (%)
70View source
What the source says
The pass rate for all Red Seal and provincial certification exams is 70%.
Alternate route 1
Trade-qualifier route: 10,800 required work-experience hours for Construction Electrician.View source
What the source says
Construction Electrician 10800 Oil Heat System Technician 8100 Heavy Equipment Operator
Alternate route 2
Trade qualifiers are not required to complete in-school training and earn a Certificate of Qualification by passing the certification exam.View source
What the source says
You are not required to complete any in-school training, though training might be available to you if you need a theoretical refresher. Once you pass the certification exam, you will receive a Certificate of Qualification. However, for some trades (Cook, Welder, Hairstylist and Machinist), you will need to pass a practical exam before you can attempt the written one.
Alternate route 3
For trade-qualifier eligibility, the work hours and tasks must have occurred within the last 10 years, and approved applicants must attempt the exam within six months of approval.View source
What the source says
Application to be Examined Page 2 Record of Work Experiences A Record of Work Experiences document (https://www.gov.nl.ca/atcd/apprentices-youth/logbook/record-of-work-experiences/) must be completed for each employer and must accompany this application. In order to qualify for the Certificate of Qualification exam, the hours worked and tasks performed in the trade must have occurred within the last 10 years. Approved applicants must attempt the examination within six (6) months of the approval date.

Not stated in the official sources we checked: Experience, Classroom training, Total training, Exam questions, Exam time (minutes), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Construction Electrician Red Seal EndorsementView source
What the source says
Designated Red Seal in: AB, BC, MB, NB, NL, NS, NT, NU, ON, PE, QC, SK, YT

Scope
Construction electricians plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems that provide heating, lighting, power, alarm, security, communication and control in residential, commercial, institutional, industrial, transportation and entertainment environments.View source
What the source says
Construction electricians plan, design, assemble, install, alter, repair, inspect, verify, commission, connect, operate, maintain and decommission electrical systems that provide heating, lighting, power, alarm, security, communication and control in residential, commercial, institutional, industrial, transportation and entertainment environments.
Credential type
Red Seal endorsementView source
What the source says
Red Seal Endorsed or Provincial Certificate of Qualification: If you have a Certificate of Qualification from another Canadian province or territory, complete an application form . The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.
Exam required
YesView source
What the source says
To get the Red Seal endorsement, you need to pass the Red Seal exam.
Exam provider
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
If approved, your exam can be rescheduled during one of the monthly rewrites at an Apprenticeship and Trades Certification Division (ATCD) regional office.
Exam questions
100View source
What the source says
Each Red Seal exam's questions are developed to assess the activities laid out in the Red Seal Occupational Standard. This trade's Red Seal exam has 100 questions Footnote *, which are distributed as follows:
Exam time (minutes)
240View source
What the source says
The time allowed to write the exam is 4 hours. Find out the number of questions on your trade's exam on the Red Seal website in the trade's Red Seal Exam Breakdowns page and divide that number into 240 minutes.
Passing mark (%)
70View source
What the source says
The Red Seal Exam has a pass mark of 70%. The writing time is four hours.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Open book, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Industrial Electrician Registered ApprenticeView source
What the source says
STEP 3 – Get Your Registration Card and Logbook: Once your application is approved, you will become a registered apprentice. You will receive a notification of acceptance, along with a registration card and an official logbook.

Scope
Industrial electricians install, maintain, test, troubleshoot, service and repair industrial electrical equipment and electrical controls.View source
What the source says
Industrial electricians install, maintain, test, troubleshoot, service and repair industrial electrical equipment and electrical controls.
Credential type
Apprentice registrationView source
What the source says
STEP 3 – Get Your Registration Card and Logbook: Once your application is approved, you will become a registered apprentice. You will receive a notification of acceptance, along with a registration card and an official logbook.
Total training
7,200 hoursView source
What the source says
APPRENTICESHIP TERM: 4 years, 7200 hours (Plan of Training – 2025) Level 1 Level 2 Level 3 Level 4 Pre-Employment (37 wks) 9 weeks 8 weeks 12 weeks 10 weeks** 9 weeks 8 weeks 12 weeks APPRENTICESHIP TERM: 4 years, 7200 hours (Plan of Training – 2017) Level 1 Level 2 Level 3 Level 4 Pre-Employment (37 wks) 10 weeks 9 weeks 12 weeks 10 weeks** 10 weeks 9 weeks 12 weeks **Refer to the Pathways to Certification diagram. Opens in new window Trade Resources
Alternate route 1
Mature applicants aged 19 may be registered at the Director’s discretion if they demonstrate ability and interest; high-school or equivalent entrance requirements otherwise apply.View source
What the source says
2.2 Notwithstanding the above, each candidate must have successfully completed a high school program or equivalent, and in addition may be required to have completed certain academic subjects as specified in a particular plan of training. Mature students, at the discretion of the Director of Apprenticeship and Trades Certification, may be registered. A mature student is defined as one who has reached the age of 19 and who can demonstrate the ability and the interest to complete the requirements for certification.
Alternate route 2
Credit may be granted for previous work experience or training validated through prior learning assessment.View source
What the source says
2.3 At the discretion of the Director of Apprenticeship and Trades Certification, credit toward the apprenticeship program may be awarded to an apprentice for previous work experience and/or training as validated through prior learning assessment.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Industrial Electrician Certificate of QualificationView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .

Scope
Industrial electricians install, maintain, test, troubleshoot, service and repair industrial electrical equipment and electrical controls.View source
What the source says
Industrial electricians install, maintain, test, troubleshoot, service and repair industrial electrical equipment and electrical controls.
Credential type
Trade certificateView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .
Certification required
NoView source
What the source says
Compulsory trades involve work where public or employee safety could be at risk. There are currently five compulsory trades: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator, and Tower Crane Operator.
Exam required
YesView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .
Exam provider
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
If approved, your exam can be rescheduled during one of the monthly rewrites at an Apprenticeship and Trades Certification Division (ATCD) regional office.
Passing mark (%)
70View source
What the source says
The pass rate for all Red Seal and provincial certification exams is 70%.
Alternate route 1
Trade-qualifier route: 10,800 required work-experience hours for Industrial Electrician.View source
What the source says
Technician 10800 Industrial Electrician 10800 Residential Electrician 7200
Alternate route 2
Trade qualifiers are not required to complete in-school training and earn a Certificate of Qualification by passing the certification exam.View source
What the source says
You are not required to complete any in-school training, though training might be available to you if you need a theoretical refresher. Once you pass the certification exam, you will receive a Certificate of Qualification. However, for some trades (Cook, Welder, Hairstylist and Machinist), you will need to pass a practical exam before you can attempt the written one.
Alternate route 3
For trade-qualifier eligibility, the work hours and tasks must have occurred within the last 10 years, and approved applicants must attempt the exam within six months of approval.View source
What the source says
Application to be Examined Page 2 Record of Work Experiences A Record of Work Experiences document (https://www.gov.nl.ca/atcd/apprentices-youth/logbook/record-of-work-experiences/) must be completed for each employer and must accompany this application. In order to qualify for the Certificate of Qualification exam, the hours worked and tasks performed in the trade must have occurred within the last 10 years. Approved applicants must attempt the examination within six (6) months of the approval date.

Not stated in the official sources we checked: Experience, Classroom training, Total training, Exam questions, Exam time (minutes), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Industrial Electrician Red Seal EndorsementView source
What the source says
Designated Red Seal in: BC, MB, NB, NL, NS, NT, ON, PE, QC, YT

Scope
Industrial electricians install, maintain, test, troubleshoot, service and repair industrial electrical equipment and electrical controls.View source
What the source says
Industrial electricians install, maintain, test, troubleshoot, service and repair industrial electrical equipment and electrical controls.
Credential type
Red Seal endorsementView source
What the source says
Red Seal Endorsed or Provincial Certificate of Qualification: If you have a Certificate of Qualification from another Canadian province or territory, complete an application form . The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.
Exam required
YesView source
What the source says
To get the Red Seal endorsement, you need to pass the Red Seal exam.
Exam provider
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
If approved, your exam can be rescheduled during one of the monthly rewrites at an Apprenticeship and Trades Certification Division (ATCD) regional office.
Exam questions
100View source
What the source says
Each Red Seal exam's questions are developed to assess the activities laid out in the Red Seal Occupational Standard. This trade's Red Seal exam has 100 questions Footnote *, which are distributed as follows:
Exam time (minutes)
240View source
What the source says
The time allowed to write the exam is 4 hours. Find out the number of questions on your trade's exam on the Red Seal website in the trade's Red Seal Exam Breakdowns page and divide that number into 240 minutes.
Passing mark (%)
70View source
What the source says
The Red Seal Exam has a pass mark of 70%. The writing time is four hours.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Open book, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Residential Electrician Registered ApprenticeView source
What the source says
STEP 3 – Get Your Registration Card and Logbook: Once your application is approved, you will become a registered apprentice. You will receive a notification of acceptance, along with a registration card and an official logbook.

Scope
Residential Electrician provincial apprenticeship training programView source
What the source says
This curriculum standard outlines the curriculum content for the Residential Electrician provincial apprenticeship training program.
Credential type
Apprentice registrationView source
What the source says
STEP 3 – Get Your Registration Card and Logbook: Once your application is approved, you will become a registered apprentice. You will receive a notification of acceptance, along with a registration card and an official logbook.
Certification required
YesView source
What the source says
To work in compulsory trades, individuals must have a Certificate of Qualification or be a registered apprentice with the Apprenticeship and Trades Certification Division (ATCD).
Total training
5,400 hoursView source
What the source says
APPRENTICESHIP LEVEL AND WAGES (5400 HOUR TRADES)
Alternate route 1
Mature applicants aged 19 may be registered at the Director’s discretion if they demonstrate ability and interest; high-school or equivalent entrance requirements otherwise apply.View source
What the source says
2.2 Notwithstanding the above, each candidate must have successfully completed a high school program or equivalent, and in addition may be required to have completed certain academic subjects as specified in a particular plan of training. Mature students, at the discretion of the Director of Apprenticeship and Trades Certification, may be registered. A mature student is defined as one who has reached the age of 19 and who can demonstrate the ability and the interest to complete the requirements for certification.
Alternate route 2
Credit may be granted for previous work experience or training validated through prior learning assessment.View source
What the source says
2.3 At the discretion of the Director of Apprenticeship and Trades Certification, credit toward the apprenticeship program may be awarded to an apprentice for previous work experience and/or training as validated through prior learning assessment.
Alternate route 3
The December 2011 Residential Electrician plan states 4,800 combined training/work hours, or 7,200 suitable work-experience hours. Its combined total conflicts with the newer progression page’s 5,400 combined hours; supersession is not established by the saved sources.View source
What the source says
A combination of training from an approved training program and suitable work experience totaling 4800 hours. Or A total of 7200 hours of suitable work experience.

Not stated in the official sources we checked: Experience, Classroom training, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Residential Electrician Certificate of QualificationView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .

Scope
Residential Electrician provincial apprenticeship training programView source
What the source says
This curriculum standard outlines the curriculum content for the Residential Electrician provincial apprenticeship training program.
Credential type
Trade certificateView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .
Certification required
YesView source
What the source says
Compulsory trades involve work where public or employee safety could be at risk. There are currently five compulsory trades: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator, and Tower Crane Operator.
Exam required
YesView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .
Exam provider
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
If approved, your exam can be rescheduled during one of the monthly rewrites at an Apprenticeship and Trades Certification Division (ATCD) regional office.
Passing mark (%)
70View source
What the source says
The pass rate for all Red Seal and provincial certification exams is 70%.
Alternate route 1
Trade-qualifier route: 7,200 required work-experience hours for Residential Electrician.View source
What the source says
Technician 10800 Industrial Electrician 10800 Residential Electrician 7200
Alternate route 2
Trade qualifiers are not required to complete in-school training and earn a Certificate of Qualification by passing the certification exam.View source
What the source says
You are not required to complete any in-school training, though training might be available to you if you need a theoretical refresher. Once you pass the certification exam, you will receive a Certificate of Qualification. However, for some trades (Cook, Welder, Hairstylist and Machinist), you will need to pass a practical exam before you can attempt the written one.
Alternate route 3
For trade-qualifier eligibility, the work hours and tasks must have occurred within the last 10 years, and approved applicants must attempt the exam within six months of approval.View source
What the source says
Application to be Examined Page 2 Record of Work Experiences A Record of Work Experiences document (https://www.gov.nl.ca/atcd/apprentices-youth/logbook/record-of-work-experiences/) must be completed for each employer and must accompany this application. In order to qualify for the Certificate of Qualification exam, the hours worked and tasks performed in the trade must have occurred within the last 10 years. Approved applicants must attempt the examination within six (6) months of the approval date.
Alternate route 4
The December 2011 Residential Electrician plan states 4,800 combined training/work hours, or 7,200 suitable work-experience hours. Its combined total conflicts with the newer progression page’s 5,400 combined hours; supersession is not established by the saved sources.View source
What the source says
A combination of training from an approved training program and suitable work experience totaling 4800 hours. Or A total of 7200 hours of suitable work experience.

Not stated in the official sources we checked: Experience, Classroom training, Total training, Exam questions, Exam time (minutes), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Electrical registration certificateView source
What the source says
(c) "electrical certificate" means an electrical registration certificate unrestricted in terms of current, voltage and phase issued in accordance with section 5;

Scope
Electrical registration certificate unrestricted in terms of current, voltage and phase. This is separate from trade certification.View source
What the source says
(c) "electrical certificate" means an electrical registration certificate unrestricted in terms of current, voltage and phase issued in accordance with section 5;
Credential type
OtherView source
What the source says
(c) "electrical certificate" means an electrical registration certificate unrestricted in terms of current, voltage and phase issued in accordance with section 5;
Prerequisite licence
Holds an electrical qualification certificate and applies in writing on the Government Service Centre form.View source
What the source says
5. An electrical certificate may be issued by the government service centre to a person who holds an electrical qualification certificate and who applies in writing to the government service centre on a form provided by the government service centre.
Alternate route 1
An interprovincial journeyman Certificate of Qualification in electrical construction issued by a Canadian jurisdiction is an electrical qualification certificate.View source
What the source says
(i) an interprovincial journeyman certificate of qualification - electrical construction, issued by a Canadian jurisdiction, or
Alternate route 2
A provincial journeyman Certificate of Qualification in electrical construction issued by the stated education division is an electrical qualification certificate.View source
What the source says
(ii) a provincial journeyman certificate of qualification - electrical construction, issued by the Institutional and Industrial Education Division of the Department of Education;

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Total training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Insurance required, Bond required, Person of record required.

Restricted contractor's certificateView source
What the source says
6. (1) A restricted contractor's certificate may be issued by the government service centre to

Scope
Restricted contractor's certificate: installations where current does not exceed 800 amps and voltage does not exceed 750 volts.View source
What the source says
(k) "restricted contractor's certificate" means a contractor's certificate issued in accordance with section 6 restricted to installations where the current does not exceed 800 amps and the voltage does not exceed 750 volts; and
Credential type
Contractor licenceView source
What the source says
6. (1) A restricted contractor's certificate may be issued by the government service centre to
Certification required
YesView source
What the source says
(3) A person shall not advertise his or her services to do electrical work unless (a) he or she is a registered contractor; and (b) the advertisement displays his or her registered name and number.
Prerequisite licence
An individual applicant must hold an electrical certificate.View source
What the source says
(ii) holds an electrical certificate, and
Alternate route 1
A registered contractor must obtain an installation and repair permit before commencing electrical work.View source
What the source says
8. (1) A registered contractor shall before commencing any electrical work obtain an installation and repair permit from the government service centre.
Alternate route 2
A company applicant must employ the holder of an electrical certificate.View source
What the source says
(ii) employs the holder of an electrical certificate, and

Not stated in the official sources we checked: Experience, Classroom training, Total training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Insurance required, Bond required, Person of record required.

Unrestricted contractor's certificateView source
What the source says
(2) An unrestricted contractor's certificate may be issued by the government service centre to

Scope
Unrestricted contractor's certificate: unrestricted in terms of current, voltage and phase.View source
What the source says
(l) "unrestricted contractor's certificate" means a contractor's certificate issued in accordance with section 6 and is unrestricted in terms of current, voltage and phase.
Credential type
Contractor licenceView source
What the source says
(2) An unrestricted contractor's certificate may be issued by the government service centre to
Certification required
YesView source
What the source says
(3) A person shall not advertise his or her services to do electrical work unless (a) he or she is a registered contractor; and (b) the advertisement displays his or her registered name and number.
Prerequisite licence
An individual applicant holds an electrical certificate with at least 2 years experience as its holder.View source
What the source says
(ii) holds an electrical certificate and has at least 2 years experience as the holder of an electrical certificate, and
Alternate route 1
A registered contractor must obtain an installation and repair permit before commencing electrical work.View source
What the source says
8. (1) A registered contractor shall before commencing any electrical work obtain an installation and repair permit from the government service centre.
Alternate route 2
A company applicant must employ an electrical certificate holder with at least 2 years experience as its holder.View source
What the source says
(ii) employs the holder of an electrical certificate who has at least 2 years experience as the holder of an electrical certificate, and

Not stated in the official sources we checked: Experience, Classroom training, Total training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Insurance required, Bond required, Person of record required.

Residential contractor's certificateView source
What the source says
(3) A residential contractor's certificate may be issued to a person who

Scope
Residential contractor's certificate: residential installations where current does not exceed 240 volts and only single phase power is supplied.View source
What the source says
(j) "residential contractors certificate" means a contractor's certificate issued in accordance with section 6 restricted to residential installations where the current does not exceed 240 volts and only single phase power is supplied;
Credential type
Contractor licenceView source
What the source says
(3) A residential contractor's certificate may be issued to a person who
Certification required
YesView source
What the source says
(3) A person shall not advertise his or her services to do electrical work unless (a) he or she is a registered contractor; and (b) the advertisement displays his or her registered name and number.
Prerequisite licence
Holds a Certificate of Qualification acceptable to the chief inspector.View source
What the source says
(b) holds a Certificate of Qualification acceptable to the chief inspector.
Alternate route 1
A registered contractor must obtain an installation and repair permit before commencing electrical work.View source
What the source says
8. (1) A registered contractor shall before commencing any electrical work obtain an installation and repair permit from the government service centre.
Alternate route 2
A valid legacy Category B Electrical Contractors Registration Certificate issued under Electrical Regulations, 1994 is another stated qualifying route.View source
What the source says
(a) holds a valid Category B Electrical Contractors Registration Certificate issued under the Electrical Regulations, 1994; or

Not stated in the official sources we checked: Experience, Classroom training, Total training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Insurance required, Bond required, Person of record required.

Contractor representative registration certificateView source
What the source says
(4) Where the chief inspector has appointed a representative, he or she shall issue a registration certificate to the representative, and the registration certificate shall indicate the scope of the work the representative may certify.

Scope
Registration to certify work as the appointed representative of a registered contractor; certificate indicates the permitted certification scope.View source
What the source says
(4) Where the chief inspector has appointed a representative, he or she shall issue a registration certificate to the representative, and the registration certificate shall indicate the scope of the work the representative may certify.
Credential type
OtherView source
What the source says
(4) Where the chief inspector has appointed a representative, he or she shall issue a registration certificate to the representative, and the registration certificate shall indicate the scope of the work the representative may certify.
Certification required
YesView source
What the source says
(5) A representative shall not certify electrical work until he or she has been issued a registration certificate under subsection (4).
Prerequisite licence
Electrical-certificate route: holds an electrical certificate, is employed by a registered contractor, and has at least four years of electrical-work experience relevant to that certificate. The separate electrical-engineer route is retained below.View source
What the source says
(2) A person is eligible for appointment as a representative if the person (a) holds an electrical certificate; (b) is an employee of a registered contractor; and (c) has at least 4 years of experience in electrical work relevant to his or her electrical certificate; or
Alternate route 1
An electrical engineering degree, provincial professional-association membership in good standing, at least 2 years related experience and a competency certification are an alternative route.View source
What the source says
(d) holds a degree in Electrical Engineering and is a member in good standing of the Association of Professional Engineers and Geoscientists for the province and has at least 2 years experience related to electrical work and who certifies that he or she considers himself or herself competent to represent fully and properly a registered contractor.
Alternate route 2
Appointment as a contractor representative is made by the chief inspector where considered appropriate.View source
What the source says
7. (1) The chief inspector may, where he or she considers it appropriate, require a registered contractor to certify his or her work through a representative appointed by the chief inspector in accordance with subsection (2).

Not stated in the official sources we checked: Experience, Classroom training, Total training, Exam required, Exam provider, Exam questions, Exam time (minutes), Passing mark (%), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Insurance required, Bond required, Person of record required.

Apprenticeship and code requirements

Apprentice registration required
YesView source
What the source says
To work in compulsory trades, individuals must have a Certificate of Qualification or be a registered apprentice with the Apprenticeship and Trades Certification Division (ATCD).
Supervision ratio
Under normal practice no more than two apprentices for every one journeyperson employed; other ratios require PACB approval.View source
What the source says
Under normal practice, the ratio of apprentices to journeypersons shall not exceed two apprentices to every one journeyperson employed. Other ratio arrangements would be determined and approved by the PACB.
Code book
Canadian Electrical Code, Part 1 as amendedView source
What the source says
(4) The standard for design, construction, installation and maintenance of all electrical work performed in the province shall be in accordance with the Canadian Electrical Code, Part 1 as amended.

Moving with it

Mobility
The division verifies Red Seal endorsed or provincial Certificates of Qualification from other Canadian provinces/territories after application, providing an equivalency letter if required for an employer or regulatory body.View source
What the source says
Red Seal Endorsed or Provincial Certificate of Qualification: If you have a Certificate of Qualification from another Canadian province or territory, complete an application form . The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.

Prepare

Practice exam for the Red Seal Construction Electrician examination

Sources

Last checked

  1. 1. https://www.gov.nl.ca/atcd/
  2. 2. https://www.gov.nl.ca/atcd/designated-trades/request-compulsory-certification/
  3. 3. https://www.red-seal.ca/eng/trades/const-elect.shtml
  4. 4. https://www.assembly.nl.ca/legislation/sr/statutes/a12-1.htm
  5. 5. https://www.gov.nl.ca/atcd/apprentices-youth/general-conditions/
  6. 6. https://www.assembly.nl.ca/Legislation/sr/regulations/rc969120.htm
  7. 7. https://www.gov.nl.ca/atcd/apprentices-youth/register-as-an-apprentice/
  8. 8. https://www.gov.nl.ca/atcd/designated-trades/list-of-designated-trades/construction-electrician/
  9. 9. https://www.gov.nl.ca/atcd/journeypersons/cq/
  10. 10. https://www.gov.nl.ca/atcd/apprentices-youth/certificationexaminfo/
  11. 11. https://www.gov.nl.ca/atcd/apprentices-youth/certification-exams/rewrites/
  12. 12. https://www.gov.nl.ca/atcd/files/Trade-Qualifier-Application-to-be-Examined-February-2026.pdf
  13. 13. https://www.gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/
  14. 14. https://www.red-seal.ca/eng/welcome.shtml
  15. 15. https://www.red-seal.ca/eng/trades/constelectric/exam-information.shtml
  16. 16. https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml
  17. 17. https://www.gov.nl.ca/atcd/designated-trades/trade-profiles/industrial-electrician/
  18. 18. https://www.red-seal.ca/eng/trades/indust-elect.shtml
  19. 19. https://www.red-seal.ca/eng/trades/industrialelectric/exam-information.shtml
  20. 20. https://www.gov.nl.ca/atcd/files/Elec_Res_PP_146_POT_NLCS_2011-12.pdf
  21. 21. https://www.gov.nl.ca/atcd/apprentices-youth/progression-schedule-class-calls/