Canada · Official-source record

Plumber licence requirements in Newfoundland and Labrador

In Newfoundland and Labrador, certification for plumbers is voluntary, through Apprenticeship and Trades Certification Division (ATCD).

View source
What the source says
Compulsory trades involve work where public or employee safety could be at risk. There are currently five compulsory trades: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator, and Tower Crane Operator.
View source
What the source says
The Apprenticeship and Trades Certification Division (ATCD) is responsible for apprenticeship training and certification programs in Newfoundland and Labrador for individuals pursuing a career in the skilled trades.

Who regulates it

Regulator
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
The Apprenticeship and Trades Certification Division (ATCD) is responsible for apprenticeship training and certification programs in Newfoundland and Labrador for individuals pursuing a career in the skilled trades.
Regulator website
https://www.gov.nl.ca/atcd/View source
What the source says
The Apprenticeship and Trades Certification Division (ATCD) is responsible for apprenticeship training and certification programs in Newfoundland and Labrador for individuals pursuing a career in the skilled trades.
Statute or rule
Apprenticeship and Certification Act, SNL 1999, Chapter A-12.1View source
What the source says
APPRENTICESHIP AND CERTIFICATION ACT

Credential status

Certification status
VoluntaryView source
What the source says
Compulsory trades involve work where public or employee safety could be at risk. There are currently five compulsory trades: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator, and Tower Crane Operator.
Red Seal available
YesView source
What the source says
Designated Red Seal in: AB Alberta , BC British Columbia , MB Manitoba , NB New Brunswick , NL Newfoundland and Labrador , NS Nova Scotia , NT Northwest Territories , NU Nunavut , ON Ontario , PE Prince Edward Island , QC Quebec , SK Saskatchewan , YT Yukon
Licensing level
ProvinceView source
What the source says
The Apprenticeship and Trades Certification Division (ATCD) is responsible for apprenticeship training and certification programs in Newfoundland and Labrador for individuals pursuing a career in the skilled trades.

Credential levels

Plumber Registered ApprenticeView source
What the source says
STEP 3 – Get Your Registration Card and Logbook: Once your application is approved, you will become a registered apprentice. You will receive a notification of acceptance, along with a registration card and an official logbook.

Scope
Plumbers install and maintain plumbing fixtures and systems such as water, hydronic, drain, waste and vent, low-pressure steam, residential fire, chemical and irrigation.View source
What the source says
Plumbers install and maintain plumbing fixtures and systems such as water, hydronic, drain, waste and vent, low-pressure steam, residential fire, chemical and irrigation.
Credential type
Apprentice registrationView source
What the source says
STEP 3 – Get Your Registration Card and Logbook: Once your application is approved, you will become a registered apprentice. You will receive a notification of acceptance, along with a registration card and an official logbook.
Total training
7,200 hoursView source
What the source says
APPRENTICESHIP TERM: 4 years, 7200 hours (Plan of Training – 2026) Level 1 Level 2 Level 3 Level 4 Pre-Employment (34 wks) 7 weeks 7 weeks 8 weeks 8 weeks** 7 weeks 7 weeks 8 weeks APPRENTICESHIP TERM: 4 years, 7200 hours (Plan of Training – 2017) Level 1 Level 2 Level 3 Level 4 Pre-Employment (34 wks) 6 weeks 7 weeks 8 weeks 8 weeks** 6 weeks 7 weeks 8 weeks **Refer to the Pathways to Certification diagram. Opens in new window Trade Resources
Alternate route 1
Mature applicants aged 19 may be registered at the Director’s discretion if they demonstrate ability and interest; high-school or equivalent entrance requirements otherwise apply.View source
What the source says
2.2 Notwithstanding the above, each candidate must have successfully completed a high school program or equivalent, and in addition may be required to have completed certain academic subjects as specified in a particular plan of training. Mature students, at the discretion of the Director of Apprenticeship and Trades Certification, may be registered. A mature student is defined as one who has reached the age of 19 and who can demonstrate the ability and the interest to complete the requirements for certification.
Alternate route 2
Credit may be granted for previous work experience or training validated through prior learning assessment.View source
What the source says
2.3 At the discretion of the Director of Apprenticeship and Trades Certification, credit toward the apprenticeship program may be awarded to an apprentice for previous work experience and/or training as validated through prior learning assessment.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Plumber Certificate of QualificationView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .

Scope
Plumbers install and maintain plumbing fixtures and systems such as water, hydronic, drain, waste and vent, low-pressure steam, residential fire, chemical and irrigation.View source
What the source says
Plumbers install and maintain plumbing fixtures and systems such as water, hydronic, drain, waste and vent, low-pressure steam, residential fire, chemical and irrigation.
Credential type
Trade certificateView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .
Certification required
NoView source
What the source says
Compulsory trades involve work where public or employee safety could be at risk. There are currently five compulsory trades: Boom Truck Operator, Construction Electrician, Residential Electrician, Mobile Crane Operator, and Tower Crane Operator.
Exam required
YesView source
What the source says
Pass the certification examination and you will earn a Certificate of Qualification . Registered apprentices will also receive a Certificate of Apprenticeship .
Exam provider
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
If approved, your exam can be rescheduled during one of the monthly rewrites at an Apprenticeship and Trades Certification Division (ATCD) regional office.
Passing mark (%)
70View source
What the source says
The pass rate for all Red Seal and provincial certification exams is 70%.
Alternate route 1
Trade-qualifier route: 10,800 required work-experience hours for Plumber.View source
What the source says
Floorcovering Installer 8100 Plumber 10800 Dozer (Red Seal) 7200
Alternate route 2
Trade qualifiers are not required to complete in-school training and earn a Certificate of Qualification by passing the certification exam.View source
What the source says
You are not required to complete any in-school training, though training might be available to you if you need a theoretical refresher. Once you pass the certification exam, you will receive a Certificate of Qualification. However, for some trades (Cook, Welder, Hairstylist and Machinist), you will need to pass a practical exam before you can attempt the written one.
Alternate route 3
For trade-qualifier eligibility, the work hours and tasks must have occurred within the last 10 years, and approved applicants must attempt the exam within six months of approval.View source
What the source says
Application to be Examined Page 2 Record of Work Experiences A Record of Work Experiences document (https://www.gov.nl.ca/atcd/apprentices-youth/logbook/record-of-work-experiences/) must be completed for each employer and must accompany this application. In order to qualify for the Certificate of Qualification exam, the hours worked and tasks performed in the trade must have occurred within the last 10 years. Approved applicants must attempt the examination within six (6) months of the approval date.

Not stated in the official sources we checked: Experience, Classroom training, Total training, Exam questions, Exam time (minutes), Open book, Application fee, Exam fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Plumber Red Seal EndorsementView source
What the source says
Designated Red Seal in: AB Alberta , BC British Columbia , MB Manitoba , NB New Brunswick , NL Newfoundland and Labrador , NS Nova Scotia , NT Northwest Territories , NU Nunavut , ON Ontario , PE Prince Edward Island , QC Quebec , SK Saskatchewan , YT Yukon

Scope
Plumbers install and maintain plumbing fixtures and systems such as water, hydronic, drain, waste and vent, low-pressure steam, residential fire, chemical and irrigation.View source
What the source says
Plumbers install and maintain plumbing fixtures and systems such as water, hydronic, drain, waste and vent, low-pressure steam, residential fire, chemical and irrigation.
Credential type
Red Seal endorsementView source
What the source says
Red Seal Endorsed or Provincial Certificate of Qualification: If you have a Certificate of Qualification from another Canadian province or territory, complete an application form . The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.
Exam required
YesView source
What the source says
To get the Red Seal endorsement, you need to pass the Red Seal exam.
Exam provider
Apprenticeship and Trades Certification Division (ATCD)View source
What the source says
If approved, your exam can be rescheduled during one of the monthly rewrites at an Apprenticeship and Trades Certification Division (ATCD) regional office.
Exam questions
125View source
What the source says
Each Red Seal exam's questions are developed to assess the activities laid out in the Red Seal Occupational Standard. This trade's Red Seal exam has 125 questions Footnote *, which are distributed as follows:
Exam time (minutes)
240View source
What the source says
The time allowed to write the exam is 4 hours. Find out the number of questions on your trade's exam on the Red Seal website in the trade's Red Seal Exam Breakdowns page and divide that number into 240 minutes.
Passing mark (%)
70View source
What the source says
The Red Seal Exam has a pass mark of 70%. The writing time is four hours.

Not stated in the official sources we checked: Certification required, Experience, Classroom training, Open book, Application fee, Licence fee, Renewal term (years), Continuing education, Minimum age, Prerequisite licence, Insurance required, Bond required, Person of record required.

Apprenticeship and code requirements

Supervision ratio
Under normal practice no more than two apprentices for every one journeyperson employed; other ratios require PACB approval.View source
What the source says
Under normal practice, the ratio of apprentices to journeypersons shall not exceed two apprentices to every one journeyperson employed. Other ratio arrangements would be determined and approved by the PACB.
Code book
National Plumbing Code (published trade-exam resource)View source
What the source says
Code Book: National Plumbing Code (*L4 – NPC and B149.1-20 Natural Gas and Propane)

Moving with it

Mobility
The division verifies Red Seal endorsed or provincial Certificates of Qualification from other Canadian provinces/territories after application, providing an equivalency letter if required for an employer or regulatory body.View source
What the source says
Red Seal Endorsed or Provincial Certificate of Qualification: If you have a Certificate of Qualification from another Canadian province or territory, complete an application form . The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.

Prepare

Practice exam for the Red Seal Plumber examination

Sources

Last checked

  1. 1. https://www.gov.nl.ca/atcd/
  2. 2. https://www.gov.nl.ca/atcd/designated-trades/request-compulsory-certification/
  3. 3. https://www.red-seal.ca/eng/trades/plumber.shtml
  4. 4. https://www.assembly.nl.ca/legislation/sr/statutes/a12-1.htm
  5. 5. https://www.gov.nl.ca/atcd/apprentices-youth/general-conditions/
  6. 6. https://www.gov.nl.ca/atcd/designated-trades/trade-profiles/plumber/
  7. 7. https://www.gov.nl.ca/atcd/apprentices-youth/register-as-an-apprentice/
  8. 8. https://www.gov.nl.ca/atcd/journeypersons/cq/
  9. 9. https://www.gov.nl.ca/atcd/apprentices-youth/certificationexaminfo/
  10. 10. https://www.gov.nl.ca/atcd/apprentices-youth/certification-exams/rewrites/
  11. 11. https://www.gov.nl.ca/atcd/files/Trade-Qualifier-Application-to-be-Examined-February-2026.pdf
  12. 12. https://www.gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/
  13. 13. https://www.red-seal.ca/eng/welcome.shtml
  14. 14. https://www.red-seal.ca/eng/trades/plumbers/exam-information.shtml
  15. 15. https://www.red-seal.ca/eng/resources/exam-prep-guide.shtml